Today's Message Index:
----------------------
1. 10:12 AM - Re: Re: B&C voltage regulator low voltage warning (Robert L. Nuckolls, III)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: B&C voltage regulator low voltage warning |
At 09:34 PM 12/23/2019, you wrote:
><john_s_bright@yahoo.com>
>
>Hi Deems... ref: http://aeroelectric.com/Pictures/Schematics/LR3_LV_Led_1.jpg
>
>
>Deems Davis wrote:
> > I would like to subsitute an LED for the Low Voltage bulb that came with
> > the B&C LR3C-14 . I posed the question to Tim Hedding @ B&C and received
> > this in response.
> >
> > If you use an LED instead of an incandescent lamp, install a 470 - 510 Ohm,
> > 1/2 Watt, resistor between terminals 3 and 5 of the LR3C-14 (or
> the SB1B-14)
> > so that the LED does not glow dimly all of the time.
Either of these techniques works . . . in fact,
Tim's suggestion is probably the most elegant.
Bob . . .
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|