----------------------------------------------------------
                           AeroElectric-List Digest Archive
                                      ---
                     Total Messages Posted Wed 02/19/20: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 04:13 AM - Re: David Clark Stereo wiring  (Whiteleg)
     2. 04:22 AM - Hyper x cloud 2 jack diagram problem  (Whiteleg)
 
 
 
________________________________  Message 1  _____________________________________


Time: 04:13:59 AM PST US
Subject: AeroElectric-List: Re: David Clark Stereo wiring
From: "Whiteleg" <ElizaWhitelegge837@yahoo.com>



ceengland7(at)gmail.com wrote:
> On 1/14/2020 1:09 PM, John M Tipton       wrote:
>      
>      
> >        
> > > 
> > > Sorry guys,
> > > 
> > > I've got this completely wrong way round on the Mike/Headphone situation:
so Question, how do I wire up the 1/4" plug for stereo
> > > 
> > > John
> > > 
> > > 
> > > 
> >      
>      
>      
>      Above is standard stereo wiring for a 1/4" phone plug.
>      Wiring terminals on the mating jack is kinda tricky to describe, but   
not complicated. For a novice, the easiest way to ID the terminals     is to
insert a stereo plug (see above) into the jack, and use an ohm     meter to ID
continuity from each terminal on the plug, to each     terminal on the jack.
>      
>      Charlie


thank you very much and it helped me a lot!


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=494892#494892


________________________________  Message 2  _____________________________________


Time: 04:22:18 AM PST US
Subject: AeroElectric-List: Hyper x cloud 2 jack diagram problem
From: "Whiteleg" <ElizaWhitelegge837@yahoo.com>


Hi

I have been using my HyperX Cloud 2 for several weeks now. However, a few days
ago, the cable got stuck, bent and the tip of the 3.5mm TRRS headphone jack split
in two.

I have ordered a replacement 3.5mm TRRS jack, but haven't yet figured out the correct
connections to solder on the jack.

Could anyone offer help in finding these and possibly give some advice on the soldering?

Kind regards

CABLE COLOR

Mic color: Red and gold

Speaker color: GREEN, BLUE, RED AND GREEN


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=494893#494893


 

-------------------------------------------------------------------------------------
                       Other Matronics Email List Services
-------------------------------------------------------------------------------------
Post A New Message               aeroelectric-list@matronics.com
UN/SUBSCRIBE                     http://www.matronics.com/subscription
List FAQ                         http://www.matronics.com/FAQ/AeroElectric-List.htm
Web Forum Interface To Lists     http://forums.matronics.com
Matronics List Wiki              http://wiki.matronics.com
Full Archive Search Engine       http://www.matronics.com/search
7-Day List Browse                http://www.matronics.com/browse/aeroelectric-list
Browse Digests                   http://www.matronics.com/digest/aeroelectric-list
Browse Other Lists               http://www.matronics.com/browse
Live Online Chat!                http://www.matronics.com/chat
Archive Downloading              http://www.matronics.com/archives
Photo Share                      http://www.matronics.com/photoshare
Other Email Lists                http://www.matronics.com/emaillists
Contributions                    http://www.matronics.com/contribution
-------------------------------------------------------------------------------------

These Email List Services are sponsored solely by Matronics and through the 
generous Contributions of its members.