---------------------------------------------------------- AeroElectric-List Digest Archive --- Total Messages Posted Sat 05/16/20: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 08:19 AM - Re: Z-11 superseded? It's not in the PDF folder (Robert L. Nuckolls, III) 2. 09:48 AM - Mitchell Voltmeter (Bean) 3. 09:54 AM - Re: Z-11 superseded? It's not in the PDF folder (Charlie England) 4. 10:47 AM - Re: Mitchell Voltmeter (Charlie England) 5. 06:56 PM - EXTERNAL PWR with MASTER/BATT SWITCH? (supik) ________________________________ Message 1 _____________________________________ Time: 08:19:47 AM PST US From: "Robert L. Nuckolls, III" Subject: Re: AeroElectric-List: Z-11 superseded? It's not in the PDF folder At 07:13 PM 5/15/2020, you wrote: > > >Hi Bob, > >Question... has Z-11 been superseded? It's not in the PDF folder but >it is in the ACAD Dwg folder at http://www.aeroelectric.com/PPS/ Not quite yet. I don't remember taking it down. It's back up. Z101 will eventually replace a number of the legacy z-figures. Bob . . . ________________________________ Message 2 _____________________________________ Time: 09:48:59 AM PST US From: Bean Subject: AeroElectric-List: Mitchell Voltmeter I am installing a Mitchell voltmeter in my RV. It has terminals that look like faston but they are bigger. The largest faston, series 250, will not fit. It may be that a connector is intended rather that terminals. Anyway what connector/terminal is appropriate? thanks and cheers Jim ________________________________ Message 3 _____________________________________ Time: 09:54:46 AM PST US From: Charlie England Subject: Re: AeroElectric-List: Z-11 superseded? It's not in the PDF folder On Sat, May 16, 2020 at 10:24 AM Robert L. Nuckolls, III < nuckolls.bob@aeroelectric.com> wrote: > At 07:13 PM 5/15/2020, you wrote: > > john_s_bright@yahoo.com> > > Hi Bob, > > Question... has Z-11 been superseded? It's not in the PDF folder but it is > in the ACAD Dwg folder at http://www.aeroelectric.com/PPS/ > > > Not quite yet. I don't remember taking it down. > It's back up. Z101 will eventually replace a number > of the legacy z-figures. > > > Bob . . . > I might have mentioned this in the past (I know that I've thought it...) My vote is to never *replace* a drawing. Revise, supersede, etc; sure. But if a numbered drawing disappears, someone who followed it in the past (or bought an a/c that used it) may need to find it again at some point down the road. A good example is the OV circuit for IR alternators. Some of us made an informed choice to use IR alts, but at some point, the doc detailing the circuit disappeared. Not an issue for a wire-head, but might cause real consternation for someone down the road who isn't electronic-savvy. Why not just water-mark it 'superseded' with notes including the reason & where to go to find the new, preferred concept? Charlie Virus-free. www.avast.com <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> ________________________________ Message 4 _____________________________________ Time: 10:47:42 AM PST US Subject: Re: AeroElectric-List: Mitchell Voltmeter From: Charlie England On 5/16/2020 11:44 AM, Bean wrote: > > I am installing a Mitchell voltmeter in my RV. It has terminals that > look like faston but they are bigger. > > The largest faston, series 250, will not fit. It may be that a > connector is intended rather that terminals. > > Anyway what connector/terminal is appropriate? > > thanks and cheers Jim > Maybe like this? https://www.ferrulesdirect.com/collections/quick-disconnects/products/fdnyd5-375 I've bought several packs of various sizes of quick disconnects, butt splices, ring terminals, etc from them, and I've been pleased with them. The ones I linked are .375" width. The website is kinda funky to navigate, but they likely have whatever you might need. Not claiming that they are as good as the 'gold standard', but the certainly seem good enough. I used my B&C-supplied crimper on them. Charlie -- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus ________________________________ Message 5 _____________________________________ Time: 06:56:34 PM PST US Subject: AeroElectric-List: EXTERNAL PWR with MASTER/BATT SWITCH? From: "supik" What's the reason, most of the certified aiplanes do not allow connecting the External Power Src without turning the MASTER / BATTERY contactor ON? -------- Igor RV10 in progress Read this topic online here: http://forums.matronics.com/viewtopic.php?p=496418#496418 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message aeroelectric-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/AeroElectric-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/aeroelectric-list Browse Digests http://www.matronics.com/digest/aeroelectric-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.