---------------------------------------------------------- AeroElectric-List Digest Archive --- Total Messages Posted Fri 06/05/20: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:42 AM - Re: Looking for help finalysing my Cozy's electrical system (johnbright) 2. 01:46 PM - Re: Looking for help finalysing my Cozy's electrical system (Zoom2136) 3. 02:08 PM - () 4. 04:46 PM - Re: Connector Shells (Charlie England) 5. 05:00 PM - Re: Connector Shells (Alec Myers) 6. 05:09 PM - Re: Connector Shells (Alec Myers) 7. 05:49 PM - Re: Connector Shells (Neal George) ________________________________ Message 1 _____________________________________ Time: 07:42:50 AM PST US Subject: AeroElectric-List: Re: Looking for help finalysing my Cozy's electrical system From: "johnbright" prestonkavanagh wrote: > John > > Thanks for sharing the several documents. Im building a Cozy IV, and about to start the plumbing and wiring, planning on an SDS system. This should be darn helpful in thinking through the issues. Regards, PK You are welcome Preston. Feel free to contact me with questions or comments. -------- John Bright, RV-6A, at FWF, O-360 Z-101 single batt dual alt SDS EM-5-F. john_s_bright@yahoo.com, Newport News, Va https://drive.google.com/drive/folders/1u6GeZo6pmBWsKykLNVQMvu4o1VEVyP4K Read this topic online here: http://forums.matronics.com/viewtopic.php?p=496635#496635 ________________________________ Message 2 _____________________________________ Time: 01:46:31 PM PST US Subject: AeroElectric-List: Re: Looking for help finalysing my Cozy's electrical system From: "Zoom2136" I'ved moved the discussion to the other thread. Here: http://forums.matronics.com/viewtopic.php?t=16775540 -------- Eric D Cozy IIIx C-GEDZ Read this topic online here: http://forums.matronics.com/viewtopic.php?p=496636#496636 ________________________________ Message 3 _____________________________________ Time: 02:08:25 PM PST US ________________________________ Message 4 _____________________________________ Time: 04:46:32 PM PST US Subject: Re: AeroElectric-List: Connector Shells From: Charlie England On 6/5/2020 4:05 PM, Robert L. Nuckolls, III wrote: > What genre' of connector? I was thinking they were > high density d-subs? > > I'll dig around in my install manuals and see > if I can confirm. > > > Bob . . . > The 430 has both std & hi density connectors. the stock backshells are apparently available from only one or two sources. Here's an ebay listing with a pretty good pic: https://www.ebay.com/itm/GNS430-GNS430W-GNS530-GNS530W-Connector-Kits-011-00351-00-/143440923345?_trksid=p2385738.m4383.l4275.c10 In my not so humble opinion, the backplane/connector arrangement is almost enough reason, by itself, to avoid Garmin. A real nightmare dealing with the tiny screws using a foot long screwdriver reaching into the back of the tray... Charlie -- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus ________________________________ Message 5 _____________________________________ Time: 05:00:42 PM PST US From: Alec Myers Subject: Re: AeroElectric-List: Connector Shells Looking at one I have left over from an Avidyne install, here=99s the m ouser page for the connector. I=99m pretty sure you can track down the back shell from this: https://www.mouser.ca/ProductDetail/TE-Connectivity/204521-2 TE part code 204521-2 On Jun 4, 2020, at 14:50, Neal George wrote: mail.com> Gentlemen - I need some of the metal connector shells for a GNS530. Anybody have part number equivalents for Digikey, Mouser, etc? Neal George ========================== ======== ========================== ======== ========================== ======== ========================== ======== ========================== ======== ________________________________ Message 6 _____________________________________ Time: 05:09:10 PM PST US From: Alec Myers Subject: Re: AeroElectric-List: Connector Shells Here=99s a size 5 back shell that would fit the 78 pin connector: https://www.mouser.ca/ProductDetail/Amphenol-Pcd/M85049-48-2-5F?qs=GaJ26EW JkZTRGEGAZKUsJA%3D%3D I=99m fairly sure the shell sizes are standard so you can mix and matc h. At the least, the dimensioned drawings are available to check. On Jun 5, 2020, at 19:56, Alec Myers wrote: =EF=BB Looking at one I have left over from an Avidyne install, here=99s the m ouser page for the connector. I=99m pretty sure you can track down the back shell from this: https://www.mouser.ca/ProductDetail/TE-Connectivity/204521-2 TE part code 204521-2 On Jun 4, 2020, at 14:50, Neal George wrote: mail.com> Gentlemen - I need some of the metal connector shells for a GNS530. Anybody have part number equivalents for Digikey, Mouser, etc? Neal Georg====================== ====bsp; - The AeroElectric-List Email ======== ========================== ==================; - MATRONICS WE B FORUMS - ________________________________ Message 7 _____________________________________ Time: 05:49:45 PM PST US From: Neal George Subject: Re: AeroElectric-List: Connector Shells Agreed, but we=99re stuck with it for now. Found a connector kit on eBay... Neal George Sent from my iPhone On Jun 5, 2020, at 6:51 PM, Charlie England wrote: =EF=BB On 6/5/2020 4:05 PM, Robert L. Nuckolls, III wrote: > What genre' of connector? I was thinking they were > high density d-subs? > > I'll dig around in my install manuals and see > if I can confirm. > > > > Bob . . . > The 430 has both std & hi density connectors. the stock backshells are appar ently available from only one or two sources. Here's an ebay listing with a p retty good pic: https://www.ebay.com/itm/GNS430-GNS430W-GNS530-GNS530W-Connector-Kits-011-00 351-00-/143440923345?_trksid=p2385738.m4383.l4275.c10 In my not so humble opinion, the backplane/connector arrangement is almost e nough reason, by itself, to avoid Garmin. A real nightmare dealing with the t iny screws using a foot long screwdriver reaching into the back of the tray. .. Charlie Virus-free. www.avast.com ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message aeroelectric-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/AeroElectric-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/aeroelectric-list Browse Digests http://www.matronics.com/digest/aeroelectric-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.