AeroElectric-List Digest Archive
Wed 12/02/20 |
Total Messages Posted: 1 |
Today's Message Index:
----------------------
1. 05:17 PM - Running Alternator and Generator wires (rparigoris)
Message 1
INDEX Back to Main INDEX
NEXT Skip to NEXT Message
LIST Reply to LIST Regarding this Message
SENDER Reply to SENDER Regarding this Message
Time: 05:17:41 PM PST US
Subject: Running Alternator and Generator wires
From: "rparigoris" <rparigor@hotmail.com>
Hi Group I have a Rotax 914 with internal generator controlled by a B&C AVC1 regulator
and a B&C SD20S alternator controlled by a B&C LR3D regulator. Question:
The SD20S has two alternator field wires #20 each and an output #8 B+. Can
I tie them together for about 2 feet? I happen to have the two #20 wires twisted
to keep them together. If the answer is yes to paralleling, then another question:
Can I parallel the AC output of the internal generator for about 10"with
my two #20 and one #8 wires? The internal generator AC output is two #12 wires
(yellow) in a shield grounded at engine side. Thx. Ron P.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=499594#499594
Other Matronics Email List Services
Post A New Message    aeroelectric-list@matronics.com
UN/SUBSCRIBE    http://www.matronics.com/subscription
List FAQ    http://www.matronics.com/FAQ/AeroElectric-List.htm
Web Forum Interface To Lists    http://forums.matronics.com
Matronics List Wiki    http://wiki.matronics.com
7-Day List Browse    http://www.matronics.com/browse/aeroelectric-list
Browse AeroElectric-List Digests    http://www.matronics.com/digest/aeroelectric-list
Browse Other Lists    http://www.matronics.com/browse
Live Online Chat!    http://www.matronics.com/chat
Archive Downloading    http://www.matronics.com/archives
Photo Share    http://www.matronics.com/photoshare
Other Email Lists    http://www.matronics.com/emaillists
Contributions    http://www.matronics.com/contribution
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --