Today's Message Index:
----------------------
1. 01:45 PM - Re: Falco (Werner Schneider)
2. 04:49 PM - Re: Falco (Charlie England)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Hi Roger,
a very nice airplane, what engine does it have under the cowling, it's a
pity that you can't harvest the fruits of your labour of love, I wish
you all the best and that your baby gets a good home!
Werner from Switzerland
On 17.11.2022 01:54, Roger & Jean wrote:
>
> Hi Listers,
>
> I have been on this list for many great years!=C2- Everyone on here ha
s
> been so very willing to help with any problems presented, great
> exchange of ideas.=C2- I especially want to say Thanks to Bob for shar
ing
> his vast experience and knowledge of aircraft and lots of other
> electrics.=C2- I have a copy of his Bible, the Aeroelectric Connection
,
> which I have referred to on many occasions.
>
> During these years I have also been in the process of crafting a plans
> built, all wood construction, Falco, which is now completed and has
> its Airworthiness Certificate, ready to fly.=C2- Sadly, after all the
> years of building and looking forward to flying my beautiful Falco,
> the years have passed and I will be 80 years old my next birthday, and
> I don=99t feel sharp enough mentally and physically to fly. So I h
ave
> not flown since the Falco was completed.=C2- As much as I hate to say
> this, My Falco is up for sale.=C2- If anyone on the list or anyone you
> know might be interested, please contact me for further details at
> rnjcurtis@charter.net. Pictures attached.
>
> Thanks for your interest,
>
> Roger
>
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
On 11/16/2022 6:54 PM, Roger & Jean wrote:
>
> Hi Listers,
>
> I have been on this list for many great years! Everyone on here has
> been so very willing to help with any problems presented, great
> exchange of ideas. I especially want to say Thanks to Bob for sharing
> his vast experience and knowledge of aircraft and lots of other
> electrics. I have a copy of his Bible, the Aeroelectric Connection,
> which I have referred to on many occasions.
>
> During these years I have also been in the process of crafting a plans
> built, all wood construction, Falco, which is now completed and has
> its Airworthiness Certificate, ready to fly. Sadly, after all the
> years of building and looking forward to flying my beautiful Falco,
> the years have passed and I will be 80 years old my next birthday, and
> I dont feel sharp enough mentally and physically to fly. So I have
> not flown since the Falco was completed. As much as I hate to say
> this, My Falco is up for sale. If anyone on the list or anyone you
> know might be interested, please contact me for further details at
> rnjcurtis@charter.net. Pictures attached.
>
> Thanks for your interest,
>
> Roger
>
It's a shame to put in all that work, and never get to fly it. Have you
considered getting a friend to fly off the test time, and then fly with
them as PIC, at least for a while, before selling? I have a friend who's
at least a year or two (I've lost track) past 95, and he just sold his
plane less than a year ago. He was flying with a qualified PIC for
probably a decade before he finally sold it.
If that won't work and you really have to sell, you should list all the
specifics about the plane like engine, empty/gross weights, etc, and
where it's located, at least a ballpark asking price, etc. I think you
can still list stuff on Barnstormers.com for free, if you don't try to
add pictures. Not terribly expensive even for pics, etc.
Good luck, and I hope you can get to fly it some before selling.
Charlie
--
This email has been checked for viruses by Avast antivirus software.
www.avast.com
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|