---------------------------------------------------------- AeroElectric-List Digest Archive --- Total Messages Posted Mon 12/19/22: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 09:28 AM - Re: Z 16 question (user9253) 2. 11:30 AM - Re: Re: Z 16 question (William Daniell) 3. 01:42 PM - Re: Z 16 question (Robert L. Nuckolls, III) ________________________________ Message 1 _____________________________________ Time: 09:28:53 AM PST US Subject: AeroElectric-List: Re: Z 16 question From: "user9253" If you mean that you want to connect the over-voltage protection device to the the other end of the same wire, then yes you can. Another option is to connect the over-voltage protection device to the downstream side of the 5 amp alternator breaker. -------- Joe Gores Read this topic online here: http://forums.matronics.com/viewtopic.php?p=509726#509726 ________________________________ Message 2 _____________________________________ Time: 11:30:03 AM PST US From: William Daniell Subject: Re: AeroElectric-List: Re: Z 16 question Joe Much appreciated Thanks Will On Mon, Dec 19, 2022, 12:33 user9253 wrote: > > If you mean that you want to connect the over-voltage protection device to > the the other end of the same wire, then yes you can. > Another option is to connect the over-voltage protection device to the > downstream side of the 5 amp alternator breaker. > > -------- > Joe Gores > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=509726#509726 > > > William Daniell +1 786 878 0246 ________________________________ Message 3 _____________________________________ Time: 01:42:47 PM PST US From: "Robert L. Nuckolls, III" Subject: Re: AeroElectric-List: Z 16 question At 07:18 PM 12/18/2022, you wrote: >I am refitting my old voltage regulator after a >failure of the bandc one I installed a year >ago.=C2 =C2 The bandc has built in ovp.=C2 I am >assuming that this is a manufacturing defect ...i had a very early version. > >I have ordered a new one. Take a look at the B&C current offering for PM rectifier/regulators at: https://tinyurl.com/2lr4u6o6 The old regulators (including the last Rotax I saw) are 3 decades old technology. The AVC1 R/R has ov protection plus alternator control relay built in. Everything in one box and 30 years 'younger'. >Meantime i am refitting a rotax regulator and I >am also refitting my old ovp/relay > >The z 16 shows the ovp from master to ground at the panel. > >Could I install the ovp at the relay end to ground at the firewall? Yes Bob . . . Un impeachable logic: George Carlin asked, "If black boxes survive crashes, why don't they make the whole airplane out of that stuff?" ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message aeroelectric-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/AeroElectric-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/aeroelectric-list Browse Digests http://www.matronics.com/digest/aeroelectric-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.