Today's Message Index:
----------------------
1. 07:56 AM - Re: Re: Which Oil Pressure Switch? (Robert L. Nuckolls, III)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Which Oil Pressure Switch? |
At 07:41 PM 4/27/2023, you wrote:
>
>Ok Bob here's what I did to check the hourmeter.
>I connected a power supply to the positive and negative pins on the
>hourmeter. This illuminated the LCD digits but elapsed time was
>not recorded. I then added the enable pin to the positive lead from
>the power supply and elapsed time began recording.
>Unfortunately, I was unable to measure any current draw with the
>equipment I have. Probably too low I guess?
>The placard on the hourmeter says 1/2W max.
>Anything else I can do?
No, I've got an approach in mind. Let
me rummage around in the 'junk box'.
Bob . . .
////
(o o)
===========o00o=(_)=o00o========
< Go ahead, make my day . . . >
< show me where I'm wrong. >
================================
In the interest of creative evolution
of the-best-we-know-how-to-do based
on physics and good practice.
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|