Today's Message Index:
----------------------
1. 03:15 PM - wiring schematic RV-10 IFR purpose HB-YKP (werner schneider)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | wiring schematic RV-10 IFR purpose HB-YKP |
Dear all,
here my 1st attempt, the load analysis is mostly based on manufacturer loads yet
and I did not yet fill all the columns. Distribution is based on the mission
IFR, however it has more on the essential bus then needed, due to the limitation
of 20 slots on the main fuse board.
I have a different approach for the Aux alternator as I had already the SB1B controller,
so by standard the Aux alternator would be switched on together with
the main alternator.
one thing I'm not 100% certain if the Aux alternator switch/bus-sense is on the
right bus, as I would need to have the alternate feed switch on in case I would
switch of the main bus or the Aux alternator would shut down (maybe the bat
bus is the right location?)
Thanks for review an comments/questions.
Cheers Werner
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=510896#510896
Attachments:
http://forums.matronics.com//files/my_electrical_load_analysis_488.pdf
http://forums.matronics.com//files/z101b_hb_ypk_148.pdf
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|