Today's Message Index:
----------------------
1. 08:56 AM - Exceptional product alert (Robert L. Nuckolls, III)
2. 10:03 AM - Re: Exceptional product alert (Eric Page)
3. 10:19 AM - Re: Exceptional product alert (Ken Ryan)
4. 10:43 AM - Re: Exceptional product alert (Charlie England)
5. 11:03 AM - Re: Exceptional product alert (Ken Ryan)
6. 12:07 PM - Re: Re: Exceptional product alert (Robert L. Nuckolls, III)
7. 12:09 PM - Re: Exceptional product alert (Robert L. Nuckolls, III)
8. 12:22 PM - Re: Exceptional product alert (Ken Ryan)
9. 01:44 PM - Re: Exceptional product alert (Charlie England)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Exceptional product alert |
I've been sampling a variety of 'clamp on' ammeters
with particular interest in acquiring one with accurate
DC capability. I brought this on in about 6 months
ago:
https://tinyurl.com/ysqy33hd
This item is offered by a constellation of sources . . .
shop around.
It agrees with lab meters to within a few percent
on DC . . . even in the lower currents. I've had
several that were 'adequate' for troubleshooting
but this one seems to supply good engineering/
design 'data'.
Just moved the G65 battery over to do a cap
check and the clamp-on agreed very well
with the WMR discharge current.
Bob . . .
////
(o o)
===========o00o=(_)=o00o========
< Go ahead, make my day . . . >
< show me where I'm wrong. >
================================
In the interest of creative evolution
of the-best-we-know-how-to-do based
on physics and good practice.
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Exceptional product alert |
Link returned a "400 Bad Request" error.
Try this: https://amz.run/7DJO
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=511618#511618
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Exceptional product alert |
Am I correct in my interpretation that this device is limited to 100 amp DC
?
On Wed, Oct 18, 2023 at 7:59=AFAM Robert L. Nuckolls, III <
nuckolls.bob@aeroelectric.com> wrote:
> I've been sampling a variety of 'clamp on' ammeters
> with particular interest in acquiring one with accurate
> DC capability. I brought this on in about 6 months
> ago:
>
> * https://tinyurl.com/ysqy33hd <https://tinyurl.com/ysqy33hd>*
>
> This item is offered by a constellation of sources . . .
> shop around.
>
> It agrees with lab meters to within a few percent
> on DC . . . even in the lower currents. I've had
> several that were 'adequate' for troubleshooting
> but this one seems to supply good engineering/
> design 'data'.
>
> Just moved the G65 battery over to do a cap
> check and the clamp-on agreed very well
> with the WMR discharge current.
>
>
> Bob . . .
>
> ////
> (o o)
> ===========o00o=(_)=o00o======
==
> < Go ahead, make my day . . . >
> < show me where I'm wrong. >
> =======================
=========
>
> In the interest of creative evolution
> of the-best-we-know-how-to-do based
> on physics and good practice.
>
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Exceptional product alert |
Nothing I play with would exceed that (starter current is always 'out of
the loop' when measuring current). That might change if I decide to play
with electric motor power for something, though. ;-)
Charlie
On 10/18/2023 12:18 PM, Ken Ryan wrote:
> Am I correct in my interpretation that this device is limited to 100
> amp DC?
>
>
> On Wed, Oct 18, 2023 at 7:59AM Robert L. Nuckolls, III
> <nuckolls.bob@aeroelectric.com> wrote:
>
> I've been sampling a variety of 'clamp on' ammeters
> with particular interest in acquiring one with accurate
> DC capability. I brought this on in about 6 months
> ago:
>
> *https://tinyurl.com/ysqy33hd*
>
> This item is offered by a constellation of sources . . .
> shop around.
>
> It agrees with lab meters to within a few percent
> on DC . . . even in the lower currents. I've had
> several that were 'adequate' for troubleshooting
> but this one seems to supply good engineering/
> design 'data'.
>
> Just moved the G65 battery over to do a cap
> check and the clamp-on agreed very well
> with the WMR discharge current.
>
>
> Bob . . .
>
> ////
> (o o)
> ===========o00o=(_)=o00o========
> < Go ahead, make my day . . . >
> < show me where I'm wrong. >
> ================================
>
> In the interest of creative evolution
> of the-best-we-know-how-to-do based
> on physics and good practice.
>
--
This email has been checked for viruses by Avast antivirus software.
www.avast.com
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Exceptional product alert |
I'm asking because I'm interested in using it on a 540 ah lithium battery
connected to a 2800 watt inverter.
On Wed, Oct 18, 2023, 09:46 Charlie England <ceengland7@gmail.com> wrote:
> Nothing I play with would exceed that (starter current is always 'out of
> the loop' when measuring current). That might change if I decide to play
> with electric motor power for something, though. ;-)
>
> Charlie
>
> On 10/18/2023 12:18 PM, Ken Ryan wrote:
>
> Am I correct in my interpretation that this device is limited to 100 amp
> DC?
>
>
> On Wed, Oct 18, 2023 at 7:59=AFAM Robert L. Nuckolls, III <
> nuckolls.bob@aeroelectric.com> wrote:
>
>> I've been sampling a variety of 'clamp on' ammeters
>> with particular interest in acquiring one with accurate
>> DC capability. I brought this on in about 6 months
>> ago:
>>
>> * https://tinyurl.com/ysqy33hd <https://tinyurl.com/ysqy33hd>*
>>
>> This item is offered by a constellation of sources . . .
>> shop around.
>>
>> It agrees with lab meters to within a few percent
>> on DC . . . even in the lower currents. I've had
>> several that were 'adequate' for troubleshooting
>> but this one seems to supply good engineering/
>> design 'data'.
>>
>> Just moved the G65 battery over to do a cap
>> check and the clamp-on agreed very well
>> with the WMR discharge current.
>>
>>
>>
>>
>>
>> Bob . . .
>>
>> ////
>> (o o)
>> ===========o00o=(_)=o00o======
==
>> < Go ahead, make my day . . . >
>> < show me where I'm wrong. >
>> =======================
=========
>>
>> In the interest of creative evolution
>> of the-best-we-know-how-to-do based
>> on physics and good practice.
>>
>
>
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm
_campaign=sig-email&utm_content=emailclient>
> Virus-free.www.avast.com
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm
_campaign=sig-email&utm_content=emailclient>
> <#m_-3819102432238277488_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Exceptional product alert |
At 12:03 PM 10/18/2023, you wrote:
>
>Link returned a "400 Bad Request" error.
Works for me. Try searching on
DC Clamp Meter ACM91
Bob . . .
////
(o o)
===========o00o=(_)=o00o========
< Go ahead, make my day . . . >
< show me where I'm wrong. >
================================
In the interest of creative evolution
of the-best-we-know-how-to-do based
on physics and good practice.
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Exceptional product alert |
At 12:18 PM 10/18/2023, you wrote:
>Am I correct in my interpretation that this device is limited to 100 amp DC?
Yes
Bob . . .
////
(o o)
===========o00o=(_)=o00o========
< Go ahead, make my day . . . >
< show me where I'm wrong. >
================================
In the interest of creative evolution
of the-best-we-know-how-to-do based
on physics and good practice.
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Exceptional product alert |
Thanks.
On Wed, Oct 18, 2023, 11:12 Robert L. Nuckolls, III <
nuckolls.bob@aeroelectric.com> wrote:
> At 12:18 PM 10/18/2023, you wrote:
>
> Am I correct in my interpretation that this device is limited to 100 amp
> DC?
>
>
> Yes
>
> Bob . . .
>
> ////
> (o o)
> ===========o00o=(_)=o00o========
> < Go ahead, make my day . . . >
> < show me where I'm wrong. >
> ================================
>
> In the interest of creative evolution
> of the-best-we-know-how-to-do based
> on physics and good practice.
>
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Exceptional product alert |
Yikes. Hope you never earn the callsign 'Sparky'. ;-)
On 10/18/2023 1:02 PM, Ken Ryan wrote:
> I'm asking because I'm interested in using it on a 540 ah
> lithiumbattery connected to a 2800 watt inverter.
>
> On Wed, Oct 18, 2023, 09:46 Charlie England <ceengland7@gmail.com> wrote:
>
> Nothing I play with would exceed that (starter current is always
> 'out of the loop' when measuring current). That might change if I
> decide to play with electric motor power for something, though. ;-)
>
> Charlie
>
> On 10/18/2023 12:18 PM, Ken Ryan wrote:
>> Am I correct in my interpretation that this device is limited to
>> 100 amp DC?
>>
>>
>> On Wed, Oct 18, 2023 at 7:59AM Robert L. Nuckolls, III
>> <nuckolls.bob@aeroelectric.com> wrote:
>>
>> I've been sampling a variety of 'clamp on' ammeters
>> with particular interest in acquiring one with accurate
>> DC capability. I brought this on in about 6 months
>> ago:
>>
>> *https://tinyurl.com/ysqy33hd*
>>
>> This item is offered by a constellation of sources . . .
>> shop around.
>>
>> It agrees with lab meters to within a few percent
>> on DC . . . even in the lower currents. I've had
>> several that were 'adequate' for troubleshooting
>> but this one seems to supply good engineering/
>> design 'data'.
>>
>> Just moved the G65 battery over to do a cap
>> check and the clamp-on agreed very well
>> with the WMR discharge current.
>>
>>
>>
>>
>
>
>
> <#m_-3819102432238277488_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>
--
This email has been checked for viruses by Avast antivirus software.
www.avast.com
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|