AeroElectric-List Digest Archive

Mon 11/27/23


Total Messages Posted: 6



Today's Message Index:
----------------------
 
     0. 10:37 AM - Make Sure You're Listed! List of Contributors Coming Soon!  (Matt Dralle)
     1. 10:23 AM - test (Matt Dralle)
     2. 10:24 AM - Re: test (Matt Dralle)
     3. 11:50 AM - Re: Make Sure You're Listed! List of Contributors Coming Soon! (ronaldcox)
     4. 03:26 PM - Re: Re: Alternator Voltage Creeping Up (Robert L. Nuckolls, III)
     5. 08:29 PM - Proper ground power plug wiring (Colyn Case)
 
 
 


Message 0


  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 10:37:03 AM PST US
    From: Matt Dralle <dralle@matronics.com>
    Subject: Make Sure You're Listed! List of Contributors Coming
    Soon! Dear Listers, There's just a few more days left in this year's List Fund Raiser and that means the List of Contributors (LOC) is just around the corner! In December I post a list of everyone that so generously made a Contribution to support the Lists. Its my way of publicly thanking everyone that took a minute to show their appreciation for the Lists. Won't you take minute and assure that your name is on the upcoming LOC? Tell others that you appreciate the Lists. Making a Contribution to support the Lists is fast and easy using your Visa, MasterCard, or Paypal account: https://matronics.com/contribution Or, drop a personal check in the mail to: Matt Dralle / Matronics 581 Jeannie Way Livermore CA 94550 I would like to thank everyone that has so generously made a Contribution thus far during this year's List Fund Raiser! Remember that its YOUR support that keeps these Lists running and improving! Don't forget to include a little comment about how the Lists have helped you! Thank you! Matt Dralle Matronics Email List Administrator


    Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 10:23:09 AM PST US
    Subject: test
    From: "Matt Dralle" <dralle@matronics.com>
    test -------- Matt Dralle Matronics Email List Administrator Read this topic online here: http://forums.matronics.com/viewtopic.php?p=512526#512526


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 10:24:17 AM PST US
    Subject: Re: test
    From: "Matt Dralle" <dralle@matronics.com>
    got it -------- Matt Dralle Matronics Email List Administrator Read this topic online here: http://forums.matronics.com/viewtopic.php?p=512527#512527


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 11:50:58 AM PST US
    Subject: Re: Make Sure You're Listed! List of Contributors Coming
    Soon!
    From: "ronaldcox" <flyboyron@gmail.com>
    Done! I see the PayPal link is working again. Thanks for making these lists available, Matt! They're invaluable for our community. -------- Ron Cox Glasair Super II F/T Under Construction at C77 - Still just about to fly! Read this topic online here: http://forums.matronics.com/viewtopic.php?p=512605#512605


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 03:26:48 PM PST US
    From: "Robert L. Nuckolls, III" <nuckolls.bob@aeroelectric.com>
    Subject: Re: Alternator Voltage Creeping Up
    At 09:52 AM 11/22/2023, you wrote: >Bob, if you had to buy a regulator for an OBAM=C2 aircraft >with EFIS and EMS, and conventional lycoming engine, >legacy alternator, what would it be? I published an essay on this thread which HAS appeared in the AeroElectric-List archives on Matronics . . . I think it got published twice . . . first as a draft and then the final version. The matronics hardware was having a bit of indigestion so the posts did not show up in my email . . . but then, I had 'read' it already! Just in case any of you were having the same problems I was having, I've upgraded the essay to an illustrated article and posted it to: http://aeroelectric.com/articles/Regulator%20Selection/Alternator%20Regulato r%20Selection.pdf Access as you see fit . . . Bob . . . //// (o o) ===========o00o=(_)=o00o======= = < Go ahead, make my day . . . > < show me where I'm wrong. > ======================== ======== In the interest of creative evolution of the-best-we-know-how-to-do based on physics and good practice.


    Message 5


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:29:22 PM PST US
    From: Colyn Case <colyncase@earthlink.net>
    Subject: Proper ground power plug wiring
    I have a ground power unit plug wired into my experimental airplane. It works great but if I leave it plugged in when it=99s powered down, it runs the battery down if left in that condition for long periods. I think I understand what is going on but I=99m not sure what to do about it. The plug is a standard Cessna type 3-pin plug. The little pin closes the relay which connects incoming power directly to the battery. I think what is going on is that if thes ship=99s battery is charged up and the GPU is disconnected from power, the ship=99s battery feeds power back through the GPU connection, thereby continuing to power the contactor which connects the GPU to the ship=99s battery. This doesn=99t use much power but eventually it sucks the ship=99s battery entirely dry. One way to solve this problem would be to put a big fat diode in the path from the GPU to the main battery. But I was wondering if someone has a more elegant idea. Colyn Case




    Other Matronics Email List Services

  • Post A New Message
  •   aeroelectric-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/AeroElectric-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/aeroelectric-list
  • Browse AeroElectric-List Digests
  •   http://www.matronics.com/digest/aeroelectric-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --