----------------------------------------------------------
                           AeroElectric-List Digest Archive
                                      ---
                     Total Messages Posted Thu 05/16/24: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 03:19 AM - Replace wire strippers in the 10-22 AWG range  (bridgetkeble)
     2. 05:10 PM - Re: Replace wire strippers in the 10-22 AWG range  (Hal Benjamin)
 
 
 
________________________________  Message 1  _____________________________________


Time: 03:19:01 AM PST US
Subject: AeroElectric-List: Replace wire strippers in the 10-22 AWG range
From: "bridgetkeble" <bridgetkeble@gmail.com>


I would like to replace my wire stripper that has recently failed. I am interested
in a tool that can strip wires in the range 10-22 AWG and possibly smaller
wires as the ones sometimes used in avionics and instruments. I would buy 2 strippers,
if necessary.

Could somebody make a recommendation for a good quality, reliable tool?

Thanks.


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=513588#513588


________________________________  Message 2  _____________________________________


Time: 05:10:09 PM PST US
From: Hal Benjamin <halbenjamin101@gmail.com>
Subject: Re: AeroElectric-List: Replace wire strippers in the 10-22 AWG range


Hi Bridget,

I used Klein Tools curve strippers for hard to reach places and larger wires. I
think it does 10-22. 

For the small wires, when I had plenty of room I used  Ideal mechanical type strippers.
I think they went down to #24. They were easier to use on the tiny wires.

Hope this helps!

Hal Benjamin 
RV4 700+ hours

Sent from my iPad

> On May 16, 2024, at 6:22 AM, bridgetkeble <bridgetkeble@gmail.com> wrote:
> 
> 
> I would like to replace my wire stripper that has recently failed. I am interested
in a tool that can strip wires in the range 10-22 AWG and possibly smaller
wires as the ones sometimes used in avionics and instruments. I would buy 2
strippers, if necessary.
> 
> Could somebody make a recommendation for a good quality, reliable tool?
> 
> Thanks.
> 
> 
> 
> 
> Read this topic online here:
> 
> http://forums.matronics.com/viewtopic.php?p=513588#513588
> 
> 
> 
> 
> 
> 
> 
> 
> 


 

-------------------------------------------------------------------------------------
                       Other Matronics Email List Services
-------------------------------------------------------------------------------------
Post A New Message               aeroelectric-list@matronics.com
UN/SUBSCRIBE                     http://www.matronics.com/subscription
List FAQ                         http://www.matronics.com/FAQ/AeroElectric-List.htm
Web Forum Interface To Lists     http://forums.matronics.com
Matronics List Wiki              http://wiki.matronics.com
Full Archive Search Engine       http://www.matronics.com/search
7-Day List Browse                http://www.matronics.com/browse/aeroelectric-list
Browse Digests                   http://www.matronics.com/digest/aeroelectric-list
Browse Other Lists               http://www.matronics.com/browse
Live Online Chat!                http://www.matronics.com/chat
Archive Downloading              http://www.matronics.com/archives
Photo Share                      http://www.matronics.com/photoshare
Other Email Lists                http://www.matronics.com/emaillists
Contributions                    http://www.matronics.com/contribution
-------------------------------------------------------------------------------------

These Email List Services are sponsored solely by Matronics and through the 
generous Contributions of its members.