AeroElectric-List Digest Archive

Mon 09/08/25


Total Messages Posted: 1



Today's Message Index:
----------------------
 
     1. 03:45 PM - Re: AERA660 RS232 Output Test? (farmrjohn)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 03:45:38 PM PST US
    Subject: Re: AERA660 RS232 Output Test?
    From: "farmrjohn" <faithvineyard@yahoo.com>
    I swapped the pins on the output side of the d-sub. Pins 6 and 7 set to MapMx work properly. Pin 9 set to NMEA does not (the same as when it was on pin 7). The wire continuity for the output side for the NMEA pins appears good. Another option would be to utilize an unused 232 port on the GPS175 vs. the Aera's if I can't get the NMEA output from the Aera to work. I have an inquiry in to Garmin on checking the output. Or, I could try and find a loaner Aera660 and try that, setting the 232 outputs is simple enough. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=515608#515608




    Other Matronics Email List Services

  • Post A New Message
  •   aeroelectric-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/AeroElectric-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/aeroelectric-list
  • Browse AeroElectric-List Digests
  •   http://www.matronics.com/digest/aeroelectric-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --