---------------------------------------------------------- Allegro-List Digest Archive --- Total Messages Posted Fri 08/04/06: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 10:36 AM - Cabin Throttle Lever/ Bowen Cable Connection (Hugh McKay III) ________________________________ Message 1 _____________________________________ Time: 10:36:57 AM PST US From: "Hugh McKay III" Subject: Allegro-List: Cabin Throttle Lever/ Bowen Cable Connection As many of you know by now I am trying to finish my Allegro 2000 Kit. Among many small details that I have been unable to get help from my Distributor (i.e. its a kit, you figure it out), one is the following question concerning how to connect the throttle cable to the throttle lever clevis. The cabin throttle lever has a metal clevis that is connected to the lever and swivels as the lever is moved. This clevis has a small hole in it for the cable to pass through. I have nothing to connect the cable to the clevis. Could some one look at their connection and explain how this is done. A close-up photograph would be very helpful. If your plane was purchased ready-to-fly you probably did not have to make this connection. I simply dont have any parts for this and I need some direction. This may not be my last request for help in these small matters. All of your past advice and help is deeply appreciated. If I didnt have you guys (The Matronics Allegro-List) I would be in deep yogurt. Many thanks! Hugh McKay In the deep south where it is Hot!