Today's Message Index:
----------------------
1. 02:12 PM - aileron hinge wear (Thom Riddle)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | aileron hinge wear |
--> Allegro-List message posted by: "Thom Riddle" <jtriddle@adelphia.net>
Does anyone have any idea what is the diameter of the Allegro aileron hinge pins?
Ours is the oldest Allegro in the USA and is beginning to show some wear and
slop in the outboard aileron hinges on both sides. This should be fixed quickly
as the looseness aggravates the wear.
On our old Cherokee, the pins had a Teflon tubing that the pins slid into. The
Teflon tube was a sacrificial piece so when it started to wear, the tubing was
replaced with no wear at all on either the hinge or the hinge pin. Good design
concept.
do not archive
--------
Thom in Buffalo
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=56157#56157
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|