Today's Message Index:
----------------------
1. 02:36 AM - Re: aileron hinge wear (Dave Grosvenor - DreamWings)
2. 04:32 AM - Re: aileron hinge wear (Thom Riddle)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: aileron hinge wear |
--> Allegro-List message posted by: "Dave Grosvenor - DreamWings" <dave@dreamwings.co.za>
Thom
I have a new set of hinges here that I have just measured - the pin is a 3mm
diameter.
Regards
Dave
----- Original Message ----- > Time: 02:12:21 PM PST US
> Subject: Allegro-List: aileron hinge wear
> From: "Thom Riddle" <jtriddle@adelphia.net>
>
> --> Allegro-List message posted by: "Thom Riddle" <jtriddle@adelphia.net>
>
> Does anyone have any idea what is the diameter of the Allegro aileron
> hinge pins?
> Ours is the oldest Allegro in the USA and is beginning to show some wear
> and
> slop in the outboard aileron hinges on both sides. This should be fixed
> quickly
> as the looseness aggravates the wear.
>
> On our old Cherokee, the pins had a Teflon tubing that the pins slid into.
> The
> Teflon tube was a sacrificial piece so when it started to wear, the tubing
> was
> replaced with no wear at all on either the hinge or the hinge pin. Good
> design
> concept.
>
> do not archive
>
> --------
> Thom in Buffalo
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: aileron hinge wear |
--> Allegro-List message posted by: "Thom Riddle" <jtriddle@adelphia.net>
Dave,
Thanks a bunch. That will save me some time.
do not archive
--------
Thom in Buffalo
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=56304#56304
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|