---------------------------------------------------------- Allegro-List Digest Archive --- Total Messages Posted Mon 11/19/07: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:34 PM - Allegro 2000 Landing light (TIM MOSES) 2. 06:11 PM - Re: Allegro 2000 Landing light () 3. 06:57 PM - Re: Allegro 2000 Landing light (TIM MOSES) ________________________________ Message 1 _____________________________________ Time: 04:34:18 PM PST US From: "TIM MOSES" Subject: Allegro-List: Allegro 2000 Landing light What is the bulb used for the Allegro 2000 cowling and wing tip landing lights? ________________________________ Message 2 _____________________________________ Time: 06:11:24 PM PST US From: Subject: RE: Allegro-List: Allegro 2000 Landing light Tim: You should use Halogen bulbs. You may use any wattage you choose as long as you do not overload the wiring used to feed the bulbs. I used two 12V 25W open front, clear reflector halogen bulbs for the wing tip lights. You can use open front bulbs for the wing tips because the wing tip lights are enclosed in the plastic covers. For the cowling light I used a glass enclosed 12V 50W clear halogen bulb. The wing tip bulbs each need to be fiber glassed in-place in the wing tip mounting piece, and the 50W glass halogen also fiber glassed in-place in the hole you will need to cut in the cowling. The hole in the cowling needs to be slightly smaller than the rim of the glass halogen bulb. Fit the bulb through the hole from the front, and fiber glass it in-place on the back side using fiberglass power and resin. Use the same technique for the wing tip lights. The female connectors for the bulbs should be correctly matched to the bulbs and be ceramic connectors because of the heat generated by the halogen bulbs. Don't use any other type connector. I've had no problems with my installation. Hugh McKay in NC Allegro 2000 Rotax 912 UL N661WW _____ From: owner-allegro-list-server@matronics.com [mailto:owner-allegro-list-server@matronics.com] On Behalf Of TIM MOSES Sent: Monday, November 19, 2007 7:32 PM Subject: Allegro-List: Allegro 2000 Landing light What is the bulb used for the Allegro 2000 cowling and wing tip landing lights? ________________________________ Message 3 _____________________________________ Time: 06:57:10 PM PST US From: "TIM MOSES" Subject: Re: Allegro-List: Allegro 2000 Landing light Thanks Hugh. I am replacing a bulb with a broken filliment in the wing tip light. It was quite a chore to get the bulb out of the reflector. I could not tell what wattage the existing bulb was due to the glue removing the printing on the bulb. Tim ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message allegro-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Allegro-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/allegro-list Browse Digests http://www.matronics.com/digest/allegro-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.