Today's Message Index:
----------------------
1. 02:02 PM - Allegro 2000 - Stall Warning System ()
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Allegro 2000 - Stall Warning System |
Paul:
I just posted another solicitation on Sept. 6 for information on the above
subject on the Allegro Forum, but thought I would follow up directly with
you concerning an earlier email I received from you on May 26, 2008 on the
same subject. In that email you told me that your red/green LED stopped
working within a few hours. You did not state if you found out what the
problem was, or if you got it working again. If you read my latest post
(Sept. 6, 08) on the Allegro Forum you will find out where I am in getting
my system working. By the way I never got the photos you referred to in your
May '08 email.
What I would like to ask you is did you have to calibrate your stall warning
system in flight by using the small black knob on the ASI? It is my
understanding that one must use this knob to calibrate the system. If this
is true, I have no procedure telling me how to do this. Also, the black knob
on my ASI appears to be loose and has a small brass wire through is which is
twisted together. If your plane came "ready to fly" the calibration may have
already been done by the factory during the test flight. Without some
direction or instruction, I am at a loss as to what to do with this knob, if
anything. We have now finally figured out the electronic part of the system
and are making corrections to circuit board circuitry. Please read my Sept.
6, 08 post along with this note and tell me what you can about the
calibration of the system. By copy I am putting this note to you up on the
Allegro Forum hoping for some good feed back. Many thanks in advance.
Hugh McKay
Allegro 2000
Rotax 912 UL
N661WW
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|