Today's Message Index:
----------------------
1. 10:33 AM - Allegro 2000, spare parts availability (theo van duin)
2. 05:56 PM - Re: Allegro 2000, spare parts availability (Hugh)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Allegro 2000, spare parts availability |
Fellow-Allegro listers,
In an email of Mr. Tim Moses of November 20, 2007, that's on the Allegro
list,
his Danish dealer reported the bankruptcy of Fantasy Air Czech per November
9th.
How is the situation now after nearly one year? Did they start-up
production again?
A sales employee of Comlet Czech, the enterprise that's making the landing
gear legs,
told me that production of the Allegro aircraft has been started in the
United States.
Where can I go to for spare parts? Most (or all) former dealers of the
Allegro, which
I found on a dealerlist dated 2008 of X-Air Australia (see below), are no
longer selling Allegro aircraft.
http://www.mcp.com.au/allegro/links.html
Can anyone of you tell me if there is any Allegro production going on, and
if yes, where?
Are there new or old Allegro dealers, that could be contacted? If yes, who?
I do need the following parts:-- Y-extension for control stick (for pilot
training)
-- Stall warning system kit
-- Instrument panel, blank
-- Landing gear leg of original
(thinner) design (eventually)
Thanks a lot for your reply,
Theo van Duin (France)
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Allegro 2000, spare parts availability |
Theo:
I live in the USA and own an Allegro 2000 which I built from a Kit in 2005
and 2006. I was aware that the original Czech company went bankrupt, but I
thought they were back in business. I had not heard that the Allegro is
being manufactured here in the US. I don't know how true that is. I would be
nice if it were true. The sole distributor of the Allegro (B bar D Aviation)
in the USA is located in Sanford, North Carolina. You can find them on the
web at www.fantasyairusa.com <http://www.fantasyairusa.com/> . They list
only one dealer and he is in Arizona, but I do believe that they will sell
direct to Allegro owners. If you can't get spare parts in Europe, you may be
able to get them from Fantasyairusa.com. You can get all the specifics from
their web site. Good luck.
Hugh McKay
Allegro 2000
Rotax 912 UL
N661WW
Located at N92 near Maiden, NC
_____
From: owner-allegro-list-server@matronics.com
[mailto:owner-allegro-list-server@matronics.com] On Behalf Of theo van duin
Sent: Friday, October 03, 2008 1:33 PM
Subject: Allegro-List: Allegro 2000, spare parts availability
Fellow-Allegro listers,
In an email of Mr. Tim Moses of November 20, 2007, that's on the Allegro
list,
his Danish dealer reported the bankruptcy of Fantasy Air Czech per November
9th.
How is the situation now after nearly one year? Did they start-up
production again?
A sales employee of Comlet Czech, the enterprise that's making the landing
gear legs,
told me that production of the Allegro aircraft has been started in the
United States.
Where can I go to for spare parts? Most (or all) former dealers of the
Allegro, which
I found on a dealerlist dated 2008 of X-Air Australia (see below), are no
longer selling Allegro aircraft.
http://www.mcp.com.au/allegro/links.html
Can anyone of you tell me if there is any Allegro production going on, and
if yes, where?
Are there new or old Allegro dealers, that could be contacted? If yes, who?
I do need the following parts:-- Y-extension for control stick (for pilot
training)
-- Stall warning system kit
-- Instrument panel, blank
-- Landing gear leg of original
(thinner) design (eventually)
Thanks a lot for your reply,
Theo van Duin (France)
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|