Allegro-List Digest Archive

Thu 02/18/10


Total Messages Posted: 6



Today's Message Index:
----------------------
 
     1. 08:59 AM - Just bought an Allegro 2000 (timpry)
     2. 10:14 AM - Re: Just bought an Allegro 2000 (theo van duin)
     3. 10:19 AM - Re: Just bought an Allegro 2000 (ledson)
     4. 02:53 PM - Re: Re: Just bought an Allegro 2000 (Hugh McKay)
     5. 06:41 PM - Re: Just bought an Allegro 2000 (ledson)
     6. 09:15 PM - Re: Re: Just bought an Allegro 2000 (Jim Hazen)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:59:13 AM PST US
    Subject: Just bought an Allegro 2000
    From: "timpry" <timpry@gmail.com>
    Actually I bought the one Joe Carswell built in 2004. I have only been up in it twice... I am already fixing an issue with the Brakes... apparently when the plane was serviced last (not by Joe) the master cylinder was topped off with 5606... But once I get the master cylinder seals replaced... I am good to go again. I have not been able to find anyone who could tell me the model for the brake/wheel assembly.. I have heard they were made by Evektor... but i havent found anything that looked similar on their web site... I dont really need the parts at the moment... but I would like to be able to order spare parts if I do need them. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=286964#286964


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 10:14:01 AM PST US
    Subject: Re: Just bought an Allegro 2000
    From: theo van duin <t.j.vanduin@gmail.com>
    Hello Timpry, For my Allegro 2000, based in France, I ordered and received spare brake discs at Evektor- Aerotechnik in the Czech Republik. The english speaking sales employee there is mr. Miroslav Jezek. He appeared to be very cooperative. His email address is: mjezek@evektor.cz Kind regards, Theo van Duin Allegro 2000 (71MM) LFQF France Jezek Miroslav <mjezek@evektor.cz> details verbergen 23-03-09 aan theo van duin <t.j.vanduin@gmail.com> datum 23 mrt. 2009 10:07 onderwerp RE: Brake discs for Fantasy Air Allegro 2000 verzonden door evektor.cz Dear Mr. van Duin, The invoice with details is enclosed. The parts will be shipped after we have the money on our account. If you agree please let me know your phone number (for delivery courier to cotact you). Thanks and best regards, Miroslav Jezek Evektor-Aerotechnik 2010/2/18, timpry <timpry@gmail.com>: > > > Actually I bought the one Joe Carswell built in 2004. I have only been up > in it twice... I am already fixing an issue with the Brakes... apparently > when the plane was serviced last (not by Joe) the master cylinder was topped > off with 5606... But once I get the master cylinder seals replaced... I am > good to go again. I have not been able to find anyone who could tell me the > model for the brake/wheel assembly.. I have heard they were made by > Evektor... but i havent found anything that looked similar on their web > site... I dont really need the parts at the moment... but I would like to > be able to order spare parts if I do need them. > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=286964#286964 > >


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 10:19:18 AM PST US
    Subject: Re: Just bought an Allegro 2000
    From: "ledson" <ledson@oneil.com>
    Welcome to the list! I'm sure you'll find it informative and useful. I know I do. The parts that you require can be purchase from B Bar D Aviation. Just call them @ 919-775-2224 and they will help you out. enjoy the Allegro! Larry Edson Allegro 2000 N4362C Read this topic online here: http://forums.matronics.com/viewtopic.php?p=286976#286976


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 02:53:47 PM PST US
    From: "Hugh McKay" <hgmckay@bellsouth.net>
    Subject: Re: Just bought an Allegro 2000
    Larry, Where are you located? I fly an Allegro 2000 out of N92 in NC. Hugh McKay Allegro 2000 Rotax 912UL N661WW -------------------------------------------------- From: "ledson" <ledson@oneil.com> Sent: Thursday, February 18, 2010 1:19 PM Subject: Allegro-List: Re: Just bought an Allegro 2000 > > Welcome to the list! I'm sure you'll find it informative and useful. I > know I do. The parts that you require can be purchase from B Bar D > Aviation. Just call them @ 919-775-2224 and they will help you out. > > enjoy the Allegro! > > Larry Edson > Allegro 2000 > N4362C > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=286976#286976 > > >


    Message 5


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:41:02 PM PST US
    Subject: Re: Just bought an Allegro 2000
    From: "ledson" <ledson@oneil.com>
    I'm located in the Dayton Ohio area. I fly out of Greene County Airport (I19). Larry Edson Allegro 2000 N4362C Read this topic online here: http://forums.matronics.com/viewtopic.php?p=287095#287095


    Message 6


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 09:15:06 PM PST US
    From: Jim Hazen <jlhazen@copper.net>
    Subject: Re: Just bought an Allegro 2000
    Larry, How's the flying? Jim N44469 -----Original Message----- From: ledson <ledson@oneil.com> Sent: Thursday, February 18, 2010 19:40 Subject: Allegro-List: Re: Just bought an Allegro 2000 I'm located in the Dayton Ohio area. I fly out of Greene County Airport (I19). Larry Edson Allegro 2000 N4362C Read this topic online here: http://forums.matronics.com/viewtopic.php?p=287095#287095 [The entire original message is not included]




    Other Matronics Email List Services

  • Post A New Message
  •   allegro-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/Allegro-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/allegro-list
  • Browse Allegro-List Digests
  •   http://www.matronics.com/digest/allegro-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --