Today's Message Index:
----------------------
1. 05:39 AM - Re: Re: Aileron control problem (Hugh McKay)
2. 08:22 PM - Re: Aileron control problem (aerosiam)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Aileron control problem |
Paul,
How many hours do you have on your Allegro? Why are you having to remove
your ailerons?
Hugh McKay
Allegro 2000
Rotax 912UL
--------------------------------------------------
From: "aerosiam" <pk@aero-siam.com>
Sent: Wednesday, July 07, 2010 10:38 PM
Subject: Allegro-List: Re: Aileron control problem
>
> Hi Brad
> I had some very helpful emails from Thom. He mentioned that you had a
> hinge set from Fantasy which included the rivets. Would you mind measuring
> the rivets?
>
> I removed the left aileron and some of the bodies are worn to the point
> where a 3.2mm pin fits easily in place of the original 3.0mm pin and I may
> end up having to remove the hinges and drill them all to 3.28mm which is
> the next available pin diameter.
>
> Thanks
>
> Paul
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=304125#304125
>
>
>
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Aileron control problem |
Hi Hugh
200 hours. I have to replace the hinge pins so it's easier just to disconnect the
control rod and put the aileron on the bench. With Fantasy out of business,
I don't have the option to buy new hinge sets.
Regards
Paul
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=304283#304283
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|