Today's Message Index:
----------------------
1. 10:24 AM - Re: Allegro 2000 Wheel Pants (Jeff)
2. 12:44 PM - Re: Allegro 2000 Wheel Pants (Hugh McKay)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Allegro 2000 Wheel Pants |
Hugh;
I have learned that Allegro LSA has perhaps more than a few sets of
wheel pants. If you haven't already contacted Doug, and you're still in
need, try calling him or ask for Ross. I have no idea how and whether
they can or will sell them. I'm also informed that the same pants have
been used since day one, and they are getting ready to make new ones,
apparently from the original molds.
Jeff Kraudelt
Sandhills Avionics
Carthage North Carolina
SandhillsAvionics.com
On 3/22/2011 10:46 PM, Hugh McKay wrote:
> The outside attaching bolts on one of my wheel pants came loose with
> out my knowledge and upon landing at a turf runway the vibration
> allowed the wheel pant to come in contact with the tire and as a
> result it ripped the fiberglass wheel pant off the aluminum bracket. I
> now have to decide if it is worth fixing, ( 2 photos attached) or if I
> can find another set of Allegro wheel pants here in the states, try to
> see if the wheel pants offered by Aircraft spruce will fit, or just
> forget the idea of having wheel pants. I am at a turf field, so wheel
> pants take a beating anyway. Any way, short of trying to get a set or
> just one from Fantasy Air (which may be impossible now) anyone out
> there have extra wheel pants for an Allegro 2000? Suggestions?
> Hugh G. McKay III, P.E.
> Senior Consultant
> Worldwide Engineering Inc.
> 4090 North NC Hwy. 16
> Denver, NC 28037
>
> Ph. 704-661-8271
> Fax 704-483-5466
> email hgmckay@bellsouth.net
> http://www.wwegeo.com
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Allegro 2000 Wheel Pants |
Jeff,
I just called Allegro LSA (Doug Hempsted and Company) and spoke to Ross.
They do have some in stock and I have ordered one (the left main). I did
not ask him if they were used or new. What do you mean the pants
=9Chave been used since day one=9D? By the way, do you
hanger an Allegro 2000 at Gilliam-McConnell? We drop in at the
Pik-in-Pig on Saturdays every now and then, and I noticed an Allegro
2000 in a hanger across the runway from the restaurant. Thanks for the
info.
Hugh G. McKay III, P.E.
Senior Consultant
Worldwide Engineering Inc.
4090 North NC Hwy. 16
Denver, NC 28037
Ph. 704-661-8271
Fax 704-483-5466
email hgmckay@bellsouth.net
http://www.wwegeo.com
From: Jeff
Sent: Thursday, March 24, 2011 2:20 PM
Subject: Re: Allegro-List: Allegro 2000 Wheel Pants
Hugh;
I have learned that Allegro LSA has perhaps more than a few sets of
wheel pants. If you haven't already contacted Doug, and you're still in
need, try calling him or ask for Ross. I have no idea how and whether
they can or will sell them. I'm also informed that the same pants have
been used since day one, and they are getting ready to make new ones,
apparently from the original molds.
Jeff Kraudelt
Sandhills Avionics
Carthage North Carolina
SandhillsAvionics.com
On 3/22/2011 10:46 PM, Hugh McKay wrote:
The outside attaching bolts on one of my wheel pants came loose with
out my knowledge and upon landing at a turf runway the vibration allowed
the wheel pant to come in contact with the tire and as a result it
ripped the fiberglass wheel pant off the aluminum bracket. I now have to
decide if it is worth fixing, ( 2 photos attached) or if I can find
another set of Allegro wheel pants here in the states, try to see if the
wheel pants offered by Aircraft spruce will fit, or just forget the idea
of having wheel pants. I am at a turf field, so wheel pants take a
beating anyway. Any way, short of trying to get a set or just one from
Fantasy Air (which may be impossible now) anyone out there have extra
wheel pants for an Allegro 2000? Suggestions?
Hugh G. McKay III, P.E.
Senior Consultant
Worldwide Engineering Inc.
4090 North NC Hwy. 16
Denver, NC 28037
Ph. 704-661-8271
Fax 704-483-5466
email hgmckay@bellsouth.net
http://www.wwegeo.com
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|