Today's Message Index:
----------------------
1. 10:02 AM - Rubber Channel Molding (Hugh McKay)
2. 07:53 PM - Re: Rubber Channel Molding (Brian Carpenter)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Rubber Channel Molding |
Has anyone had to replace the small rubber molding that goes around the
top of the vertical stabilizer where the horizontal stabilizer comes in
contact? This same molding also goes around the =9CU=9D
cutout on the wheel pants. If so, where did you get it?
Hugh G. McKay III, P.E.
Senior Consultant
Worldwide Engineering Inc.
4090 North NC Hwy. 16
Denver, NC 28037
Ph. 704-661-8271
Fax 704-483-5466
email hgmckay@bellsouth.net
http://www.wwegeo.com
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Rubber Channel Molding |
Hugh,
Seems that I talked to Doug about that. He said to go to an automotive part
s store and get some molding like what is used on car doors.. My is cracked
but have not replaced it yet..
Good luck,
Brian
n3081x
928-205-8300
--- On Wed, 3/30/11, Hugh McKay <hgmckay@bellsouth.net> wrote:
From: Hugh McKay <hgmckay@bellsouth.net>
Subject: Allegro-List: Rubber Channel Molding
=0A=0AHas anyone had to replace the small rubber molding that goes around t
he top =0Aof the vertical stabilizer where the horizontal stabilizer comes
in contact? =0AThis same molding also goes around the =9CU=9D c
utout on the wheel pants. If so, =0Awhere did you get it?=0A=C2-=0AHugh G
. =0AMcKay III, P.E.
Senior Consultant
Worldwide Engineering Inc.
4090 North =0ANC Hwy. 16
Denver, NC 28037
Ph. 704-661-8271
Fax =0A704-483-5466
email =0Ahgmckay@bellsouth.net
http://www.wwegeo.com
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|