---------------------------------------------------------- Allegro-List Digest Archive --- Total Messages Posted Wed 06/10/15: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:19 PM - Re: Gascolator (ledson) 2. 01:17 PM - Re: Gascolator (Jerry Goldberg) 3. 01:22 PM - Re: Re: Gascolator (Jerry Goldberg) 4. 02:07 PM - Re: Re: Gascolator (Doug Hempstead) 5. 04:07 PM - Re: Gascolator (ledson) ________________________________ Message 1 _____________________________________ Time: 12:19:05 PM PST US Subject: Allegro-List: Re: Gascolator From: "ledson" I spoke with Doug Hempstead at AllegroLSA. He is going to make me a couple of the required O rings for the gascolator bowl. Thanks Everyone. Larry Edson N4362C Read this topic online here: http://forums.matronics.com/viewtopic.php?p=443359#443359 ________________________________ Message 2 _____________________________________ Time: 01:17:32 PM PST US From: "Jerry Goldberg" Subject: RE: Allegro-List: Gascolator Doug at Allegro LSA has acquired new stocks of parts for the Allegro models. You can contact him on the cc email or I think they joined the Allegro list. He would know. If you find out post it. Also how would you turn the gas off to change it or the fuel filter. Thanks, Jerry -----Original Message----- From: owner-allegro-list-server@matronics.com [mailto:owner-allegro-list-server@matronics.com] On Behalf Of ledson Sent: Tuesday, June 09, 2015 9:05 PM Subject: Allegro-List: Gascolator Does anyone know the size of the gascolator O ring on the Allegro 2000? Mine has started to leak. Thanks, Larry Edson N4362C Read this topic online here: http://forums.matronics.com/viewtopic.php?p=443322#443322 ________________________________ Message 3 _____________________________________ Time: 01:22:00 PM PST US From: "Jerry Goldberg" Subject: RE: Allegro-List: Re: Gascolator Larry, did Doug give you any instructions on how to clean or change the fuel filter? Thanks, Jerry -----Original Message----- From: owner-allegro-list-server@matronics.com [mailto:owner-allegro-list-server@matronics.com] On Behalf Of ledson Sent: Wednesday, June 10, 2015 2:19 PM Subject: Allegro-List: Re: Gascolator I spoke with Doug Hempstead at AllegroLSA. He is going to make me a couple of the required O rings for the gascolator bowl. Thanks Everyone. Larry Edson N4362C Read this topic online here: http://forums.matronics.com/viewtopic.php?p=443359#443359 ________________________________ Message 4 _____________________________________ Time: 02:07:38 PM PST US From: "Doug Hempstead" Subject: RE: Allegro-List: Re: Gascolator Jerry, To clean the fuel filter, simply remove from gascalator (I am sorry, but the earlier Fantasy Air Allegro do NOT have a fuel shut off before the gascolator, you must either drain fuel or put something under it to catch the fuel, it will only be gravity fed and can be stopped by a small plug {such as a small bolt}). Clean the filter with grease cutting soap and water, blow out and let it dry completely, then re-install. We do carry filters for the older Allegro if needed. Thanks, Doug Douglas Hempstead LSA America, Inc. 231 US Hwy 158 East Littleton, NC 27850 252-586-1200 - office 252-586-1203 - fax www.allegrolsa.com doug@allegrolsa.com -----Original Message----- From: owner-allegro-list-server@matronics.com [mailto:owner-allegro-list-server@matronics.com] On Behalf Of Jerry Goldberg Sent: Wednesday, June 10, 2015 4:22 PM Subject: RE: Allegro-List: Re: Gascolator --> Larry, did Doug give you any instructions on how to clean or change the fuel filter? Thanks, Jerry -----Original Message----- From: owner-allegro-list-server@matronics.com [mailto:owner-allegro-list-server@matronics.com] On Behalf Of ledson Sent: Wednesday, June 10, 2015 2:19 PM Subject: Allegro-List: Re: Gascolator I spoke with Doug Hempstead at AllegroLSA. He is going to make me a couple of the required O rings for the gascolator bowl. Thanks Everyone. Larry Edson N4362C Read this topic online here: http://forums.matronics.com/viewtopic.php?p=443359#443359 ________________________________ Message 5 _____________________________________ Time: 04:07:26 PM PST US Subject: Allegro-List: Re: Gascolator From: "ledson" I spoke with Doug Hempstead at AllegroLSA. He is going to make me a couple of the required O rings for the gascolator bowl. Thanks Everyone. Larry Edson N4362C Read this topic online here: http://forums.matronics.com/viewtopic.php?p=443371#443371 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message allegro-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Allegro-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/allegro-list Browse Digests http://www.matronics.com/digest/allegro-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.