Today's Message Index:
----------------------
1. 08:39 AM - Re: Re: ADS-B (Allegro)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
The echoUAT Might make for a much more simple install. Also 1399 with the da
sh mounted GPS receiver antenna combo.!
Brian Carpenter
N3081X
> On Sep 25, 2019, at 05:59, Hugh McKay <hgmckay@bellsouth.net> wrote:
>
> I have just read the discussion on the above subject. The skybeacon will n
ot fit on the Allegro 2000 or the 2007 without major and costly modification
, and the tailBeacon likewise. However, there is a location where the tailBe
acon can be located and will work fine. I have installed the tail beacon on m
y Allegro 2000 E-LSA (N661WW) and it is working without a problem. It is mou
nted on the airframe crossbar in the cockpit just above the instrument panel
. Since the top of the cockpit is clear the unit can see all Satellites, and
the wiring connections from that point to the panel is short and simple. I d
id my own work since I built the plane from a KIT. Cost for the unit was $1,
669.00 from uAvionix and my labor was free. I will post a few pictures later
on the Allegro Matronics List. If any other Allegro owners want to contact m
e I will be glad to give you more detail. My personal email is hgmckay@bells
outh.net
>
> Hugh G. McKay III, P.E. Fellow. L.M. ASCE
> Senior Consultant
> Worldwide Engineering Inc.
> 4090 North NC Hwy. 16
> Denver, NC 28037
>
> Ph. 704-661-8271
> Fax 704-483-5466
> Email hgmckay@bellsouth.net
> http://www.geo.com (click on Power Division)
> Sent from Mail for Windows 10
>
> From: ishadatta
> Sent: Wednesday, September 25, 2019 12:49 AM
> To: allegro-list@matronics.com
> Subject: Allegro-List: Re: ADS-B
>
>
> Thank Great=C3=82 Post. :)
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=491464#491464
>
>
>
>
>
>
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|