----------------------------------------------------------
                           AnPMech-List Digest Archive
                                      ---
                     Total Messages Posted Tue 03/09/04: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 02:11 PM - Cylinder numbering IO-540  (Trampas)
     2. 04:02 PM - Re: Cylinder numbering IO-540  (Trampas)
 
 
 
________________________________  Message 1  _____________________________________


Time: 02:11:58 PM PST US
From: "Trampas" <tstern@nc.rr.com>
Subject: AnPMech-List: Cylinder numbering IO-540

--> AnPMech-List message posted by: "Trampas" <tstern@nc.rr.com>

I was wondering what is the cylinder numbering scheme for the IO-540. Also
does anyone know if there is a chart showing the different engines and the
cylinder numbering? 

I would also appreciate any references to as to normal engine parameters for
various engines, like CHTs, EGTs, and oil temperature and pressure. 

Thanks
Trampas






________________________________  Message 2  _____________________________________


Time: 04:02:19 PM PST US
From: "Trampas" <tstern@nc.rr.com>
Subject: RE: AnPMech-List: Cylinder numbering IO-540

--> AnPMech-List message posted by: "Trampas" <tstern@nc.rr.com>

Well I think I figured it out... The Continental is cylinder numbering is
like a Lycoming with engine turned 180 degrees.

I was asking as that I am making an engine monitor and had numerous requests
for the EGT and CHT gauges to represent the cylinder placement. See enclosed
bit map, which has a Lycoming on left and Continental on right.

Trampas