Today's Message Index:
----------------------
1. 03:00 PM - Socket Extractor (sptom@cts.com)
2. 11:18 PM - Re: Socket Extractor (David Aronson)
Message 1
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Socket Extractor |
--> Avionics-List message posted by: "sptom@cts.com" <sptom@cts.com>
A simple question (I hope). I have a broken wire on the female (socket)
side of a D-Sub miniature (high-density) connector that connects my radio
(KY97A) to my intercom (NAT 83-001). Is there an extraction tool that can
be used on these very fine sockets. If so, what is the tool name (number)
and where do I get one. If not, what do I do, start over with a new
connector? Thanks!
Tom
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Socket Extractor |
--> Avionics-List message posted by: David Aronson <aronsond@pacbell.net>
Radio Shack has them. Just look for D-sub connector remover. They have
both miniature and regular.
David Aronson
RV4 N504RV
----- Original Message -----
From: <sptom@cts.com>
Subject: Avionics-List: Socket Extractor
> --> Avionics-List message posted by: "sptom@cts.com" <sptom@cts.com>
>
> A simple question (I hope). I have a broken wire on the female (socket)
> side of a D-Sub miniature (high-density) connector that connects my radio
> (KY97A) to my intercom (NAT 83-001). Is there an extraction tool that can
> be used on these very fine sockets. If so, what is the tool name (number)
> and where do I get one. If not, what do I do, start over with a new
> connector? Thanks!
>
> Tom
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|