---------------------------------------------------------- Avionics-List Digest Archive --- Total Messages Posted Tue 01/14/03: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 03:00 PM - Socket Extractor (sptom@cts.com) 2. 11:18 PM - Re: Socket Extractor (David Aronson) ________________________________ Message 1 _____________________________________ Time: 03:00:00 PM PST US From: "sptom@cts.com" Subject: Avionics-List: Socket Extractor --> Avionics-List message posted by: "sptom@cts.com" A simple question (I hope). I have a broken wire on the female (socket) side of a D-Sub miniature (high-density) connector that connects my radio (KY97A) to my intercom (NAT 83-001). Is there an extraction tool that can be used on these very fine sockets. If so, what is the tool name (number) and where do I get one. If not, what do I do, start over with a new connector? Thanks! Tom ________________________________ Message 2 _____________________________________ Time: 11:18:40 PM PST US From: David Aronson Subject: Re: Avionics-List: Socket Extractor --> Avionics-List message posted by: David Aronson Radio Shack has them. Just look for D-sub connector remover. They have both miniature and regular. David Aronson RV4 N504RV ----- Original Message ----- From: Subject: Avionics-List: Socket Extractor > --> Avionics-List message posted by: "sptom@cts.com" > > A simple question (I hope). I have a broken wire on the female (socket) > side of a D-Sub miniature (high-density) connector that connects my radio > (KY97A) to my intercom (NAT 83-001). Is there an extraction tool that can > be used on these very fine sockets. If so, what is the tool name (number) > and where do I get one. If not, what do I do, start over with a new > connector? Thanks! > > Tom > >