Today's Message Index:
----------------------
 
     1. 05:16 PM -  (Doug Mattson)
     2. 07:02 PM - Re:  (Martini Luc J.R.)
 
 
 

Message 1


					NEXT
 Skip to NEXT Message
	LIST
 Reply to LIST Regarding this Message
		SENDER
 Reply to SENDER Regarding this Message

      
      
Time: 
05:16:01 PM PST US
From: 
"Doug Mattson" <dm10495@cedarnet.org>
Subject: 
      
      --> Avionics-List message posted by: "Doug Mattson" <dm10495@cedarnet.org>
      
      I have a Bendix encoding altimeter part number 3252013-0101. The altimeter
      works ok but when I check the output of the encoder it is linear but 500
      feet to high. Does anyone know how to adjust this?
      Doug Mattson
      dm10495@cedarnet.org
      
      
      
      
      
      

Message 2


					INDEX
 Back to Main INDEX
				PREVIOUS
 Skip to PREVIOUS Message
					NEXT
 Skip to NEXT Message
	LIST
 Reply to LIST Regarding this Message
		SENDER
 Reply to SENDER Regarding this Message

      
      
Time: 
07:02:56 PM PST US
From: 
"Martini Luc J.R." <martini@foxinternet.net>
Subject: 
Re: 
      
      --> Avionics-List message posted by: "Martini Luc J.R." <martini@foxinternet.net>
      
      Yeah.. A 500' ft error is probably Beyond a calibration adjustment, more
      likely a fried Line Driver Amp.  Put it in a box and send it off to an
      Instrument Shop; in the alternative, install a Blind Encoder (Cheapest
      option  - about $135) if you build an adapter that hooks directly into the
      Encoding Altimeter harness. (presuming you have the wiring pinout for your
      encoding altimeter)
      Don't even try opening the altimeter unless you have a "clean room" (and
      that doesn't mean a place you vacuumed) and the proper equipment and
      experience to work on it.  Since  your asking, I presume you don't.
      
      Luc
      .
      
      
      ----- Original Message -----
      From: "Doug Mattson" <dm10495@cedarnet.org>
      Subject: Avionics-List:
      
      
      > --> Avionics-List message posted by: "Doug Mattson" <dm10495@cedarnet.org>
      >
      > I have a Bendix encoding altimeter part number 3252013-0101. The altimeter
      > works ok but when I check the output of the encoder it is linear but 500
      > feet to high. Does anyone know how to adjust this?
      > Doug Mattson
      > dm10495@cedarnet.org
      >
      >
      
      
      
      
      
      








Other Matronics Email List Services




Post A New Message
  
avionics-list@matronics.com
UN/SUBSCRIBE
  
http://www.matronics.com/subscription
List FAQ
  
http://www.matronics.com/FAQ/Avionics-List.htm
Full Archive Search Engine
  
http://www.matronics.com/search
7-Day List Browse
  
http://www.matronics.com/browse/avionics-list
Browse Avionics-List Digests
  
http://www.matronics.com/digest/avionics-list
Browse Other Lists
  
http://www.matronics.com/browse
Archive Downloading
  
http://www.matronics.com/archives
Photo Share
  
http://www.matronics.com/photoshare
Other Email Lists
  
http://www.matronics.com/emaillists
Contributions
  
http://www.matronics.com/contributions









These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.




-- Please support this service by making your Contribution today! --