Today's Message Index:
----------------------
1. 10:10 PM - Pins for Narco Escort II connector? (David Andreatta)
Message 1
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Pins for Narco Escort II connector? |
--> Avionics-List message posted by: David Andreatta <dandreat@earthlink.net>
Greetings;
I'm doing a re-install of an old Narco Escort II, after a major harness
cleanup. I could really use a new set of pins for the main card edge
connector (v.s. some splicing). At first glance, they appear very
similar to the standard Molex pins used in King equipment. BUT, they are
smaller and have a slightly different style of contact wiper. They can
be easily extracted with the Molex (King) tool.
The connector frame is made by Amp, but no part number is visible. I'll
try Narco if I get no response from the list.
Ideally, someone would have a Tyco/Amp part number so I could order from
Digi-Key, Newark, etc. If not, perhaps someone has a small collection in
a drawer they might be willing to sell? I'd take about 20, just to have
a few spares.
Thanks in advance,
Dave Andreatta
(for off-list reply, mailto:dandreat@earthlink.net )
P.S. Just in case someone is looking, Narco has a nice page of manuals
and pinouts for their radios. Check out
http://www.narcoavionics.com/downloadbody.htm .
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|