---------------------------------------------------------- Avionics-List Digest Archive --- Total Messages Posted Thu 03/20/03: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 10:10 PM - Pins for Narco Escort II connector? (David Andreatta) ________________________________ Message 1 _____________________________________ Time: 10:10:09 PM PST US From: David Andreatta Subject: Avionics-List: Pins for Narco Escort II connector? --> Avionics-List message posted by: David Andreatta Greetings; I'm doing a re-install of an old Narco Escort II, after a major harness cleanup. I could really use a new set of pins for the main card edge connector (v.s. some splicing). At first glance, they appear very similar to the standard Molex pins used in King equipment. BUT, they are smaller and have a slightly different style of contact wiper. They can be easily extracted with the Molex (King) tool. The connector frame is made by Amp, but no part number is visible. I'll try Narco if I get no response from the list. Ideally, someone would have a Tyco/Amp part number so I could order from Digi-Key, Newark, etc. If not, perhaps someone has a small collection in a drawer they might be willing to sell? I'd take about 20, just to have a few spares. Thanks in advance, Dave Andreatta (for off-list reply, mailto:dandreat@earthlink.net ) P.S. Just in case someone is looking, Narco has a nice page of manuals and pinouts for their radios. Check out http://www.narcoavionics.com/downloadbody.htm .