---------------------------------------------------------- Avionics-List Digest Archive --- Total Messages Posted Sun 04/06/03: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 08:00 AM - #22 size pin removal tool...S-Tec installation (Ralph E. Capen) ________________________________ Message 1 _____________________________________ Time: 08:00:35 AM PST US From: "Ralph E. Capen" Subject: Avionics-List: #22 size pin removal tool...S-Tec installation --> Avionics-List message posted by: "Ralph E. Capen" Hey listers, Anyone out there have a #22 size pin removal/insertion tool? It would be smaller than the tool that you would use on your UPSAT gear (I have one of those). It is for the high density connectors (like S-Tec). If so, where did you get it? I've already tried mouser/digikey/altex...all they have is the bigger ones. I know that this is a fairly inexpensive tool...but when you don't have one it's worth a fortune...! I've already sent a zap to the connector manufacturer - but I thought I'd try you guy/gals too! Thanks for your assistance, Ralph Capen Wiring my 6A in Richardson, TX