Today's Message Index:
----------------------
1. 02:58 PM - Davtron & Narco (Philip Rice)
2. 05:03 PM - New Microline Installation (Michael Di Marco)
3. 05:31 PM - Re:Davtron M903 (KarkelB@aol.com)
4. 07:48 PM - wiring question (Dave Ford)
Message 1
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> Avionics-List message posted by: Philip Rice <ricephil@pld.com>
I need to install Davtron 701A digital ADF indicator to Narco ADF-31A
I unable to find a maintenance manual for ADF-31A . I need to know
where to located TP114 and TP116
Any help you can give me will be appreciate.
Thank You
Phil Rice
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | New Microline Installation |
--> Avionics-List message posted by: Michael Di Marco <mgdimarco@yahoo.com>
I just installed a Microline comm and xpndr. The comm is working great, but the
xpndr is not always replying. ATC shows a strong return and accurate encoder
when it does reply, but results are intermitent. Ideas? Mike Di Marco
---------------------------------
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> Avionics-List message posted by: KarkelB@aol.com
Hi Folks,
just wanted to know whether one can use the davtron digital vor
to run a standard vor indicator.
regards Karkel
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
<avionics-list@matronics.com>
--> Avionics-List message posted by: "Dave Ford" <dford@michweb.net>
I have the AK-350 encoder, an IK2000 engine monitor w/density altitude readout
(requiring gray code input, looping out to another device), Garmin GTX327, Garmin
GNC300XL. The transponder has a gray code input and 2 RS232 inputs to receive
Icarus or Shadin type altitude info. It also has altitude output in Icarus
format. The GPS has RS232 inputs to receive (I believe) Icarus or Shadin type
info (according to installation manual). It also has a 232 output channel
showing aviation type info (serial position, velocity, and navigation data) which
I'm not sure where that info is to be used.
I am currently thinking that from the encoder to the IK2000 with gray code
looping that out to the transponder with a RS232 output going to the GPS unit
with altitude info. Does that sound right?
Next for the Navaid A/P does it get steering info from the GPS RS232 output
NMEA format or from the GPS left/right steering info that would normally go to
a Nav Indicator? Do I need the Smart Coupler with this unit?
Dave Ford
RV6
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|