---------------------------------------------------------- Avionics-List Digest Archive --- Total Messages Posted Sat 04/26/03: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:58 PM - Davtron & Narco (Philip Rice) 2. 05:03 PM - New Microline Installation (Michael Di Marco) 3. 05:31 PM - Re:Davtron M903 (KarkelB@aol.com) 4. 07:48 PM - wiring question (Dave Ford) ________________________________ Message 1 _____________________________________ Time: 02:58:40 PM PST US From: Philip Rice Subject: Avionics-List: Davtron & Narco --> Avionics-List message posted by: Philip Rice I need to install Davtron 701A digital ADF indicator to Narco ADF-31A I unable to find a maintenance manual for ADF-31A . I need to know where to located TP114 and TP116 Any help you can give me will be appreciate. Thank You Phil Rice ________________________________ Message 2 _____________________________________ Time: 05:03:50 PM PST US From: Michael Di Marco Subject: Avionics-List: New Microline Installation --> Avionics-List message posted by: Michael Di Marco I just installed a Microline comm and xpndr. The comm is working great, but the xpndr is not always replying. ATC shows a strong return and accurate encoder when it does reply, but results are intermitent. Ideas? Mike Di Marco --------------------------------- ________________________________ Message 3 _____________________________________ Time: 05:31:36 PM PST US From: KarkelB@aol.com Subject: Avionics-List: Re:Davtron M903 --> Avionics-List message posted by: KarkelB@aol.com Hi Folks, just wanted to know whether one can use the davtron digital vor to run a standard vor indicator. regards Karkel ________________________________ Message 4 _____________________________________ Time: 07:48:53 PM PST US From: "Dave Ford" Subject: Avionics-List: wiring question --> Avionics-List message posted by: "Dave Ford" I have the AK-350 encoder, an IK2000 engine monitor w/density altitude readout (requiring gray code input, looping out to another device), Garmin GTX327, Garmin GNC300XL. The transponder has a gray code input and 2 RS232 inputs to receive Icarus or Shadin type altitude info. It also has altitude output in Icarus format. The GPS has RS232 inputs to receive (I believe) Icarus or Shadin type info (according to installation manual). It also has a 232 output channel showing aviation type info (serial position, velocity, and navigation data) which I'm not sure where that info is to be used. I am currently thinking that from the encoder to the IK2000 with gray code looping that out to the transponder with a RS232 output going to the GPS unit with altitude info. Does that sound right? Next for the Navaid A/P does it get steering info from the GPS RS232 output NMEA format or from the GPS left/right steering info that would normally go to a Nav Indicator? Do I need the Smart Coupler with this unit? Dave Ford RV6