---------------------------------------------------------- Avionics-List Digest Archive --- Total Messages Posted Sun 05/11/03: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:57 PM - Supporting the other ends of our gyros (Ralph E. Capen) ________________________________ Message 1 _____________________________________ Time: 06:57:45 PM PST US From: "Ralph E. Capen" Subject: Avionics-List: Supporting the other ends of our gyros --> Avionics-List message posted by: "Ralph E. Capen" Fellow listers, What are you doing (have you done) to support the forward (back) ends of your long gyros? A couple of mine will go through the next forward bulkhead so I can probably rivet on a piece of angle and clamp the gyro to that. One (AI) is too short but is right on top of another (HSI) that goes through the next forward bulkhead - I was thinking of making up a spacer to put those two together and clamp them together using the support on the one that goes all the way through to hold both. Another of mine (S-Tec30 TC/AP) is also too short and is not close enough to another one to "lean" on. Your thoughts please,