----------------------------------------------------------
                           Avionics-List Digest Archive
                                      ---
                     Total Messages Posted Wed 01/14/04: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 07:35 PM - ACK30 Encoder  (brianstanley)
     2. 08:08 PM - Re: copper foil antennas  (Tom Hutchison)
 
 
 
________________________________  Message 1  _____________________________________


Time: 07:35:54 PM PST US
From: brianstanley <brianstanley@shaw.ca>
Subject: Avionics-List: ACK30 Encoder

--> Avionics-List message posted by: brianstanley <brianstanley@shaw.ca>

Can anyone tell me which way the screws move for adjusting an ACK 30
encoder. I have two srews one marked H one marked L
Thanks






________________________________  Message 2  _____________________________________


Time: 08:08:30 PM PST US
From: Tom Hutchison <tom.hutchison@pilot-rock.net>
Subject: Avionics-List: Re: copper foil antennas

--> Avionics-List message posted by: Tom Hutchison <tom.hutchison@pilot-rock.net>

Check out:  http://www.nancymoon.com/antennas.htm

Roy and Nancy are the new owners of Express Aircraft.

Tom Hutchison
http://www.express-builder.com

>Time: 11:06:04 PM PST US
>From: "Troy Scott" <tscott1217@bellsouth.net>
>Subject: Avionics-List: copper foil antennas
>
>--> Avionics-List message posted by: "Troy Scott" <tscott1217@bellsouth.net>
>
>Gentlemen,
>
>I've been installing various copper foil antennas in my Glasair.  Today I
>discovered that the last one in the box is a NAV antenna.  It was supposed
>to be a COM antenna.  I don't remember what the lengths of the elements are
>supposed to be on the two types.  I'm thinking if the COM needs shorter
>elements I can just convert the antenna by shortening the elements and
>adjusting the length of the cable.   Otherwise I'll just sell this
>unused/unopened Stoddard-Hamilton antenna kit and buy another one.
>
>Regards,
>Troy
>