----------------------------------------------------------
                           Avionics-List Digest Archive
                                      ---
                     Total Messages Posted Sat 01/17/04: 1
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 03:23 PM - SL30  (Troy Scott)
 
 
 
________________________________  Message 1  _____________________________________


Time: 03:23:01 PM PST US
From: "Troy Scott" <tscott1217@bellsouth.net>
Subject: Avionics-List: SL30

--> Avionics-List message posted by: "Troy Scott" <tscott1217@bellsouth.net>

Gentlemen,

I have a new SL30.  I've been studying the installation manual.  The Com and
Nav sides seem to be pretty independent.  The audio pinouts are:
14-com audio to headphones
13-com audio ground
23-nav audio to headphones
20-nav audio ground.

I plan to connect directly to Bose headsets.  Questions:
1. Are the two audio grounds common?
2. Can the two audio outs be connected directly together without the
traditional isolation resistors?
3. Is there a "setup/software" way to connect nav and com audio?
4. Could I install an external potentiometer for the nav only to facilitate
using the nav audio in a normal way without jumping through menu hoops?

Those of you using the SL30 without an audio panel: Is this an issue?  Is it
difficult or time consuming to turn the nav audio on/off and switch from
ident to/from VOR voice messages?

Regards,
Troy Scott
tscott1217@bellsouth.net