Today's Message Index:
----------------------
1. 07:38 PM - Narco Transponder (Shawn Wolk)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Narco Transponder |
--> Avionics-List message posted by: "Shawn Wolk" <shawnwolk@sprint.ca>
Hello group,
New to this group. Have been on the Pietenpol lis for a while.
Does anybody here the position of the internal frequency adjusters on a Narco
A50A. I removed the front cover because one of the white plastic discs that
have the frequency #'s slipped forward and pushed the spring ahead that rides
on the six sided shoulder of he white disc and creates the detents. The knobs
can go on in two positions. The internal tuners (or rheostats, I'm not sure what
they are called) have an oval shaped opening that the oval pin on the knobs
can slip into. And there is a little indentation on one side of the oval opening.
It appears that if these are all pointed straight up, that the numbers on
the transponder should read 0000. Does anyone know for sure if his is correct,
or do I likely have the knobs installed 180deg. out?
Shawn Wolk
Winnipeg, MB
C-GZOT Skyhopper 2
C-FRAZ Pietenpol Aircamper
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|