Today's Message Index:
----------------------
1. 01:16 PM - Garmin Transponder (Bob Gibfried)
2. 03:28 PM - Re: Garmin Transponder (Doug McNutt)
3. 05:01 PM - Re: Garmin Transponder (Pascal Gosselin)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Garmin Transponder |
--> Avionics-List message posted by: "Bob Gibfried" <rfg842@cox.net>
Just purchased a Garmin GTX 320A transponder to replace a Narco 50A which
gave up the ghost.
Can anyone help with the connections to a ACK Technologies Inc. encoder.
Serial No. is 26814.
Have the Garmin plug and tray but no documentation on the AGK.
Thanks
Bob Gibfried
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Garmin Transponder |
--> Avionics-List message posted by: Doug McNutt <douglist@macnauchtan.com>
At 15:14 -0500 4/29/04, Bob Gibfried wrote:
>Can anyone help with the connections to a ACK Technologies Inc. encoder.
>Serial No. is 26814.
I have in my hands an ACK manual for their model A-30. 6 x 2.6 x 1.7 inches with
a 15 pin "D" connector. Circa 1989. Seems to start with serial number 24000
If it will help I'll see about scanning it. About seven 8.5 x 11 pages. Ask.
ACK number on the paperwork is 408 295 1712 but it's a bit yellow.
--
--> There are 10 kinds of people: those who understand binary, and those who
don't <--
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Garmin Transponder |
--> Avionics-List message posted by: Pascal Gosselin <pascal@aeroteknic.com>
At 04:14 PM 4/29/2004, you wrote:
>--> Avionics-List message posted by: "Bob Gibfried" <rfg842@cox.net>
>
>Just purchased a Garmin GTX 320A transponder to replace a Narco 50A which
>gave up the ghost.
>
>Can anyone help with the connections to a ACK Technologies Inc. encoder.
>Serial No. is 26814.
Oh yes I forget.... You could also buy the Garmin Narco AT50 adaptor
($120) and just slide in the GTX-320A with no installation required.
-Pascal
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|