---------------------------------------------------------- Avionics-List Digest Archive --- Total Messages Posted Mon 07/12/04: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:56 AM - Antenna placement (Bob Gibfried) 2. 06:24 AM - Re: Antenna placement (Ron Koyich) 3. 07:56 AM - Re: Antenna placement (David Lloyd) ________________________________ Message 1 _____________________________________ Time: 05:56:28 AM PST US From: "Bob Gibfried" Subject: Avionics-List: Antenna placement --> Avionics-List message posted by: "Bob Gibfried" Need to add a GPS antenna to the top of my Tripacer. Only logical space is on the metal fairing close to one of the com antennas on either the right or left side. Going to feed a Bendix/King 150MFD. Can anyone tell me if I would have an interference problem? Thanks Bob, Wichita ________________________________ Message 2 _____________________________________ Time: 06:24:33 AM PST US From: "Ron Koyich" Subject: RE: Avionics-List: Antenna placement --> Avionics-List message posted by: "Ron Koyich" Should work a treat mounting the GPS antenna on the metal wing to fuselage gap seal, Bob. Go for it, keeping it a couple feet away from transmitting antennas. Ron ________________________________ Message 3 _____________________________________ Time: 07:56:00 AM PST US From: "David Lloyd" Subject: Re: Avionics-List: Antenna placement --> Avionics-List message posted by: "David Lloyd" Bob, I believe that Garmin recommends mounting it 30", or more, from any transmitting antenna. I know that the Avionics shop that did my 430 install mounted the GPS antenna closer than 30" and I do not have odd spurious problems with guidance. David ----- Original Message ----- From: "Bob Gibfried" Subject: Avionics-List: Antenna placement > --> Avionics-List message posted by: "Bob Gibfried" > > Need to add a GPS antenna to the top of my Tripacer. Only logical space is > on the metal fairing close to one of the com antennas on either the right or > left side. Going to feed a Bendix/King 150MFD. > > Can anyone tell me if I would have an interference problem? > > Thanks > > Bob, Wichita > >