---------------------------------------------------------- Avionics-List Digest Archive --- Total Messages Posted Thu 10/28/04: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 03:26 PM - Antenna (Clay Smith) 2. 04:41 PM - Re: Antenna (cgalley) 3. 09:04 PM - Re: Antenna (Brian Lloyd) ________________________________ Message 1 _____________________________________ Time: 03:26:41 PM PST US From: "Clay Smith" Subject: Avionics-List: Antenna --> Avionics-List message posted by: "Clay Smith" Should all antenna / coax cable connectors be silver soldered? Thanks, Clay ________________________________ Message 2 _____________________________________ Time: 04:41:33 PM PST US From: "cgalley" Subject: Re: Avionics-List: Antenna --> Avionics-List message posted by: "cgalley" This came up this week and the answer is still NO! Cy Galley - Chair, AirVenture Emergency Aircraft Repair A Service Project of Chapter 75 EAA Safety Programs Editor - TC EAA Sport Pilot ----- Original Message ----- From: "Clay Smith" Subject: Avionics-List: Antenna > --> Avionics-List message posted by: "Clay Smith" > > Should all antenna / coax cable connectors be silver soldered? > > Thanks, > Clay > > ________________________________ Message 3 _____________________________________ Time: 09:04:41 PM PST US From: Brian Lloyd Subject: Re: Avionics-List: Antenna --> Avionics-List message posted by: Brian Lloyd On Oct 28, 2004, at 6:20 PM, Clay Smith wrote: > --> Avionics-List message posted by: "Clay Smith" > > > Should all antenna / coax cable connectors be silver soldered? No. Use 63/37 rosin-core solder. Brian Lloyd 6501 Red Hook Plaza brianl@lloyd.com Suite 201 +1.340.998.9447 St. Thomas, VI 00802 There is a time to laud one's country and a time to protest. A good citizen is prepared to do either as the need arises.