Today's Message Index:
----------------------
1. 04:31 PM - Dancing SL70 PA (Larry Bowen)
2. 05:33 PM - Re: Dancing SL70 PA (John Schroeder)
3. 06:52 PM - Re: Dancing SL70 PA (Larry Bowen)
4. 07:09 PM - Re: Dancing SL70 PA (John Schroeder)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws;
s=s1024; d=yahoo.com;
b=lxKQBLDG0jjJqLG/Xbln5PQkDbxLIAZmrvjVWNqrk6paJNyynPMmpISe0IlwBMT/dycKo4TqHEOUmXX7C3jlM+VslxRmiaDAg1jnB9GiOUKoBvUwJTAWvNrxhZUI5lo5z774FHRMGFAvy2a8XUctj+AvaHK5qjl/PE4/48NAbSs=
;
--> Avionics-List message posted by: Larry Bowen <lcbowen@yahoo.com>
I have an SL70 xpdr in my RV-8. After 30 hours of TT, the display showing PA has
developed a problem. The digits occasionally dance around. It'll show 029
for example, but blink 034 very quickly. Any idea what might cause this? The
one time I asked ATC for a check, they verified an ident and accurate altitiude.
The Dynon is providing encoder info.
Thx.
Larry Bowen
Larry@BowenAero.com
http://BowenAero.com
---------------------------------
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Dancing SL70 PA |
--> Avionics-List message posted by: "John Schroeder" <jschroeder@perigee.net>
Larry -
Dynon D-10 or D-10A? Thanks,
John
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Avionics-List message posted by: "Larry Bowen" <Larry@BowenAero.com>
D10.
I just came from the hanger where I looked at it again. It said 006, and
was jumping to 049, I think -- hard to tell it was changing so fast. When I
powered off the Dynon, the xpdr changed to "---", then back to the dancing
when it was powered back on.
I sent an email to Dynon asking for their opinion.
-
Larry Bowen
Larry@BowenAero.com
http://BowenAero.com
> -----Original Message-----
> From: John Schroeder [mailto:jschroeder@perigee.net]
> Sent: Sunday, November 28, 2004 8:34 PM
> To: avionics-list@matronics.com
> Subject: Re: Avionics-List: Dancing SL70 PA
>
> --> Avionics-List message posted by: "John Schroeder"
> --> <jschroeder@perigee.net>
>
> Larry -
>
> Dynon D-10 or D-10A? Thanks,
>
> John
>
>
> =========
> =========
> Matronics Forums.
> =========
> =========
>
>
>
>
>
>
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Dancing SL70 PA |
--> Avionics-List message posted by: "John Schroeder" <jschroeder@perigee.net>
On the D-10 there are a lot of wires for the transponder interface. I'd
check the harness.
John
On Sun, 28 Nov 2004 21:52:20 -0500, Larry Bowen <Larry@bowenaero.com>
wrote:
> --> Avionics-List message posted by: "Larry Bowen" <Larry@BowenAero.com>
>
> D10.
>
> I just came from the hanger where I looked at it again. It said 006, and
> was jumping to 049, I think -- hard to tell it was changing so fast.
> When I
> powered off the Dynon, the xpdr changed to "---", then back to the
> dancing
> when it was powered back on.
>
> I sent an email to Dynon asking for their opinion.
>
> -
> Larry Bowen
> Larry@BowenAero.com
> http://BowenAero.com
>
>
>> -----Original Message-----
>> From: John Schroeder [mailto:jschroeder@perigee.net]
>> Sent: Sunday, November 28, 2004 8:34 PM
>> To: avionics-list@matronics.com
>> Subject: Re: Avionics-List: Dancing SL70 PA
>>
>> --> Avionics-List message posted by: "John Schroeder"
>> --> <jschroeder@perigee.net>
>>
>> Larry -
>>
>> Dynon D-10 or D-10A? Thanks,
>>
>> John
>>
>>
>> =========
>> =========
>> Matronics Forums.
>> =========
>> =========
>>
>>
>>
>>
>>
>>
>
>
--
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|