---------------------------------------------------------- Avionics-List Digest Archive --- Total Messages Posted Wed 04/20/05:1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 09:32 AM - Re: Bendix King KFC 150 Autopilot (Pascal Gosselin) ________________________________ Message 1 _____________________________________ Time: 09:32:04 AM PST US From: Pascal Gosselin Subject: Re: Avionics-List: Bendix King KFC 150 Autopilot --> Avionics-List message posted by: Pascal Gosselin At 21:20 2005-04-11, you wrote: >--> Avionics-List message posted by: brianstanley > >Anyone help me diagnose this problem. The autopilot goes through it self >test routine fine. The command bar works perfectly off the heading bug >and altitude controller. The problem comes if I then engage the >autopilot the yoke locks solid both in pitch and roll. Has anybody had >that happen to theirs. > >The plane just came back from some wing work where components were moved >around. I know the wiring got cut and spliced so I'm wondering if some >of the wiring got reconnected wrongly. Does anyone have an install >manual for a KFC150 so I could do a point to point continuity check? The >shop is telling me it's a coincidence and they did reconnect the wiring >correctly but I'd like to verify if I could. >Thanks Brian Give these guys a try: http://www.capitalavionics.com/ -Pascal