---------------------------------------------------------- Avionics-List Digest Archive --- Total Messages Posted Sat 02/04/06: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 10:28 AM - Garmin 530/430 - Rocky Mountain Monitor (Rob Mokry) 2. 12:53 PM - Re: Garmin 530/430 - Rocky Mountain Monitor (Bruce Gray) 3. 06:00 PM - Cessna rt385a to in386a with r443b (Scott) 4. 11:23 PM - Re: Cessna rt385a to in386a with r443b (Sportypilot) ________________________________ Message 1 _____________________________________ Time: 10:28:15 AM PST US From: "Rob Mokry" Subject: Avionics-List: Garmin 530/430 - Rocky Mountain Monitor --> Avionics-List message posted by: "Rob Mokry" Been having difficulties getting the monitor to talk to the Garmin 530 via the RS232, has anyone else been able to make this work? Thanks in advance, Rob ________________________________ Message 2 _____________________________________ Time: 12:53:38 PM PST US From: "Bruce Gray" Subject: RE: Avionics-List: Garmin 530/430 - Rocky Mountain Monitor --> Avionics-List message posted by: "Bruce Gray" I set mine to "shadin protocol" and it works fine. Bruce www.glasair.org -----Original Message----- From: owner-avionics-list-server@matronics.com [mailto:owner-avionics-list-server@matronics.com] On Behalf Of Rob Mokry Sent: Saturday, February 04, 2006 10:15 AM Subject: Avionics-List: Garmin 530/430 - Rocky Mountain Monitor --> Avionics-List message posted by: "Rob Mokry" Been having difficulties getting the monitor to talk to the Garmin 530 via the RS232, has anyone else been able to make this work? Thanks in advance, Rob ________________________________ Message 3 _____________________________________ Time: 06:00:30 PM PST US From: Scott Subject: Avionics-List: Cessna rt385a to in386a with r443b --> Avionics-List message posted by: Scott Hello All... By chance does anyone have the pinout for the in-386a glideslope indicator? Better yet would be how the in-386a connects to a 443b glideslope receiver. Even better would be how the in-386a, rt-385a radio, and the r-443b glideslope receiver all get wired together. I have the avionics installations manuals from McCurtain for the 1974-1976 Cessnas. However, they do not offer manuals for when the 385a and in386a's were in use. Addionally, I purchased the r-443b and rt-385a pinouts from Eastern Avionics. But, they did not have the in-386a pinouts. Any help in integrating the 443b with the 386a with the rt-385a is most appreciated. Thanx in advance... -Scott ________________________________ Message 4 _____________________________________ Time: 11:23:07 PM PST US From: "Sportypilot" Subject: Re: Avionics-List: Cessna rt385a to in386a with r443b --> Avionics-List message posted by: "Sportypilot" Need a quick measurement, I am building my modular pannel for my rv9a now and cutting the center section and needed to configure the sizes ect.. I don't have them yet but want to leave plenty of room for the garmin sl40 and GTX 330 , I have the width but need the hight of each of these radio and transponder together.. since I don't have trays or anything I am just planning ahead, Making sure I have the room for the trim switches at the bottom.. and a 396 at the top with the air gizmo's 396 mount at the top.. thanks in advance.. Danny..