---------------------------------------------------------- Avionics-List Digest Archive --- Total Messages Posted Sun 02/12/06: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:30 AM - Wire gauge (Bob Gibfried) 2. 07:12 AM - Re: Wire gauge (Marvin Dupree) 3. 08:13 AM - Re: Wire gauge (John Rippengal) ________________________________ Message 1 _____________________________________ Time: 06:30:12 AM PST US From: "Bob Gibfried" Subject: Avionics-List: Wire gauge --> Avionics-List message posted by: "Bob Gibfried" Wiring up my new panel and have not run across a wire gauge for the mike and phone connection. Is 18 gauge OK? Any need to use shielded wire? Thanks, Bob, Wichita ________________________________ Message 2 _____________________________________ Time: 07:12:20 AM PST US From: Marvin Dupree <97corvette@cox.net> Subject: Re: Avionics-List: Wire gauge --> Avionics-List message posted by: Marvin Dupree <97corvette@cox.net> 18ga should be okay but use shielded on the mike marv m20e On Feb 12, 2006, at 8:07 AM, Bob Gibfried wrote: > --> Avionics-List message posted by: "Bob Gibfried" > > Wiring up my new panel and have not run across a wire gauge for the > mike and > phone connection. Is 18 gauge OK? Any need to use shielded wire? > > Thanks, > > Bob, Wichita > > ________________________________ Message 3 _____________________________________ Time: 08:13:58 AM PST US From: "John Rippengal" Subject: Re: Avionics-List: Wire gauge --> Avionics-List message posted by: "John Rippengal" 18 gauge is ok but it is unnecessarily thick. 22g is quite good enough. The mike connections should definitely be screened and it would do no harm to wire the phone connection with screened too. John > --> Avionics-List message posted by: "Bob Gibfried" > > Wiring up my new panel and have not run across a wire gauge for the mike > and > phone connection. Is 18 gauge OK? Any need to use shielded wire? > > Thanks, > > Bob, Wichita