Today's Message Index:
----------------------
1. 05:28 AM - Pin out (Bob Gibfried)
2. 05:44 AM - Re: Pin out (Bruce Gray)
3. 08:00 AM - Re:MiroAir Radio (aeroads@comcast.net)
4. 08:40 AM - Re: Re:MiroAir Radio (frequent flyer)
5. 11:37 AM - Re: GTX330 TIS with DAC GDC34A/Chelton (Tim Olson)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> Avionics-List message posted by: "Bob Gibfried" <rfg842@cox.net>
Thanks to all who replied to my request for a KMD 150 pin out. First to
reply was a gentleman from England. It's an amazing world we live in when a
simple request can be met halfway around the world!
Now if anyone can point me to a good set of crimpers. Mashing the pins with
a needle nose just doesn't work for me.
Thanks
Bob, Wichita
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> Avionics-List message posted by: "Bruce Gray" <Bruce@glasair.org>
You should go to http://aeroelectric.com/, buy the book and read all the
articles on the web site. Then you'll know the right questions to ask.
Bruce
www.glasair.org
-----Original Message-----
From: owner-avionics-list-server@matronics.com
[mailto:owner-avionics-list-server@matronics.com] On Behalf Of Bob Gibfried
Sent: Wednesday, February 22, 2006 8:25 AM
Subject: Avionics-List: Pin out
--> Avionics-List message posted by: "Bob Gibfried" <rfg842@cox.net>
Thanks to all who replied to my request for a KMD 150 pin out. First to
reply was a gentleman from England. It's an amazing world we live in when a
simple request can be met halfway around the world!
Now if anyone can point me to a good set of crimpers. Mashing the pins with
a needle nose just doesn't work for me.
Thanks
Bob, Wichita
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re:MiroAir Radio |
--> Avionics-List message posted by: aeroads@comcast.net
Have a MicroAir in an open cockpit biplane: a Stampe the transceiver has
great range in both trans and receive with a small ground plane in the
rounded turtle deck I use the flexible black rubber coated antenna that
was recommended the squelch requires constant attention for both radio
and intercom not surprising in the open cockpit but is loud and
clear once set my only reservation is reading the frequency settings
in some lighting conditions I like to set frequencies before takeoff if
I could have installed the unit directly aimed at the pilots eye there would
be no grat problem but the panel depth required a side mounting
Yup a might fine unit Murray aeroads@comcast.net
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re:MiroAir Radio |
--> Avionics-List message posted by: frequent flyer <jdhcv@yahoo.com>
I have on in my Cessna 150. Works great but hard to
change frequencies in turbulence.
Jack
--- erodes@comcast.net wrote:
> --> Avionics-List message posted by:
> aeroads@comcast.net
>
> Have a MicroAir in an open cockpit biplane: a Stampe
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: GTX330 TIS with DAC GDC34A/Chelton |
--> Avionics-List message posted by: Tim Olson <Tim@MyRV10.com>
Mike,
Do you have the GNS480 for a Nav/Com, or the 430/530?
I called to ask them for an update today and right
now their questioning that maybe the 480/330 are
teaming up to thwart the function in some way.
Would be interesting to know.
Also, sure would be nice if they'd get their 480/330
interfaces figured out so they can drop the whole
GDC34A altogether and just read the serial direct.
Tim Olson - RV-10 N104CD - Flying
Mike wrote:
> --> Avionics-List message posted by: "Mike" <mlas@cox.net>
>
> I have the equipment, but like you am debugging. It's in and flying but
> I can't get it to work..
>
> Mike
>
> -----Original Message-----
> From: owner-avionics-list-server@matronics.com
> [mailto:owner-avionics-list-server@matronics.com] On Behalf Of Tim Olson
> Sent: Tuesday, February 21, 2006 9:07 AM
> To: rv10-list@matronics.com; rv-list@matronics.com;
> avionics-list@matronics.com
> Subject: Avionics-List: GTX330 TIS with DAC GDC34A/Chelton
>
> --> Avionics-List message posted by: Tim Olson <Tim@MyRV10.com>
>
> At one point on a list I had a reply from someone who
> actually was using the GDC34A Arinc to serial converter
> like I am to get TIS traffic on their Chelton or other
> EFIS from the GTX330 Transponder.
>
> Right now that's my last remaining thing to debug that
> I've identified, and I'm hoping to talk to someone
> who's got it working to verify settings.
>
> Anyone out there with that equipment that can comment?
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|