---------------------------------------------------------- Avionics-List Digest Archive --- Total Messages Posted Thu 03/16/06: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:13 AM - Removal tool (Bob Gibfried) 2. 06:33 AM - Re: Removal tool (Bruce Gray) 3. 08:58 AM - Re: Removal tool (rd2@evenlink.com) ________________________________ Message 1 _____________________________________ Time: 06:13:16 AM PST US From: "Bob Gibfried" Subject: Avionics-List: Removal tool --> Avionics-List message posted by: "Bob Gibfried" Anyone have the part number for the Bendix King tool to remove the radios from the tray? Source? Thanks, Bob, Wichita ________________________________ Message 2 _____________________________________ Time: 06:33:01 AM PST US From: "Bruce Gray" Subject: RE: Avionics-List: Removal tool --> Avionics-List message posted by: "Bruce Gray" Should be a standard size hex wrench, Bruce www.glasair.org -----Original Message----- From: owner-avionics-list-server@matronics.com [mailto:owner-avionics-list-server@matronics.com] On Behalf Of Bob Gibfried Sent: Thursday, March 16, 2006 9:05 AM Subject: Avionics-List: Removal tool --> Avionics-List message posted by: "Bob Gibfried" Anyone have the part number for the Bendix King tool to remove the radios from the tray? Source? Thanks, Bob, Wichita ________________________________ Message 3 _____________________________________ Time: 08:58:05 AM PST US From: rd2@evenlink.com Subject: RE: Avionics-List: Removal tool --> Avionics-List message posted by: rd2@evenlink.com Yes it is standard size, 3/32" I think. Be careful not to overturn, some of their stops are plastic. Rumen _____________________Original message __________________________ (received from Bruce Gray; Date: 09:29 AM 3/16/2006 -0500) --> Avionics-List message posted by: "Bruce Gray" Should be a standard size hex wrench, Bruce www.glasair.org -----Original Message----- From: owner-avionics-list-server@matronics.com [mailto:owner-avionics-list-server@matronics.com] On Behalf Of Bob Gibfried Sent: Thursday, March 16, 2006 9:05 AM Subject: Avionics-List: Removal tool --> Avionics-List message posted by: "Bob Gibfried" Anyone have the part number for the Bendix King tool to remove the radios from the tray? Source? Thanks, Bob, Wichita --