----------------------------------------------------------
                           Avionics-List Digest Archive
                                      ---
                     Total Messages Posted Wed 08/23/06: 3
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 12:39 PM - Connector  (Bob Gibfried)
     2. 02:14 PM - Re: Connector  (Gerry Holland)
     3. 02:48 PM - Re: Connector  (Mike Ferrer)
 
 
 
________________________________  Message 1  _____________________________________


Time: 12:39:37 PM PST US
From: "Bob Gibfried" <rfg842@cox.net>
Subject: Avionics-List: Connector

Can anyone suggest a source for a female 37 pin connector for a KMD 150 o
n
the inter net?

After three weeks of promises, my avionics shop is too busy to make a
pigtail with just power and ground.  The on line sites I've loojked at, i
t's
difficult to dertermine the correct connector.  Would probably also need 
a
crimper.

Thanks

Bob, Wichita

________________________________  Message 2  _____________________________________


Time: 02:14:31 PM PST US
Subject: Re: Avionics-List: Connector
From: Gerry Holland <gnholland@onetel.com>

> Bob Hi!
> 
> Can anyone suggest a source for a female 37 pin connector for a KMD 150 o
n the
> inter net?
> 
> Try: http://www.northerntech.com/ntc_dc.htm
> 
> I have a KMD150 and these look familiar. As I remember when wiring I didn
=B9t
> use a Crimp Tool as difficult to find and I carefully solder the very few
> connections I needed to make.
> 
> Regards
> 
> Gerry
> Europa XS Trigear
> G-FIZY
>  


________________________________  Message 3  _____________________________________


Time: 02:48:03 PM PST US
From: "Mike Ferrer" <mike@ferrer-aviation.com>
Subject: Re: Avionics-List: Connector

Bob, 

You can buy the connector from www.mouser.com.  It's a DSub connector 
and you can get them in either solder or crimp style.  Or, if you 
prefer, I have the crimp style connector in stock and can add the 
power/ground pigtails tonight and send it out tomorrow. Send me an email 
at mike@ferrer-aviation.com if I can help.

Mike
  ----- Original Message ----- 
  From: Bob Gibfried 
  To: avionics-list@matronics.com 
  Sent: Wednesday, August 23, 2006 2:38 PM
  Subject: Avionics-List: Connector


        Can anyone suggest a source for a female 37 pin connector for a 
KMD 150 on the inter net?

        After three weeks of promises, my avionics shop is too busy to 
make a pigtail with just power and ground.  The on line sites I've 
loojked at, it's difficult to dertermine the correct connector.  Would 
probably also need a crimper.

        Thanks

        Bob, Wichita