Today's Message Index:
----------------------
1. 12:01 AM - Re: Skymap IIIC internal battery replacement (Bill Putney)
2. 09:09 AM - Re: Skymap IIIC internal battery replacement (Noel Loveys)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Skymap IIIC internal battery replacement |
Peter,
Thanks, I did get it apart to confirm the battery configuration. I found
a place here in California that has the same battery configuration
with the same chemistry as the one Skyforce used. It's about $3.25 plus
Shipping. You have to request they weld on solderable tabs but that only
costs and $0.25. I've been soldering for about 50 years but every once
in a while I do lift a trace. I hate those 50W wire wound resisters
soldered into a .020" trace. Easy to put in and hard to get out.
http://www.batteryspace.com/index.asp?PageAction=VIEWPROD&ProdID=1617
- Bill
peter.rees01@tiscali.co.uk wrote:
>
> Hi Bill
>
> I did ours a few years ago (if the 3C you have is the one in an
> avionics tray, not the slim one). didn' t have any instreuctions just
> took the lid off and I think the top PCB (there are about 4 boards in
> there) - unsoldered the old battery and fitted the new one - only took
> about an hour. If you're not good at soldering, I'd find someone who is
> - the PCB tracks will lift etc if you overheat them.
>
> happy landings
>
> Peter
>
>
>
>
>
> ___________________________________________________________
>
> Tiscali Broadband only 9.99 a month for your first 3 months! http://www.tiscali.co.uk/products/broadband/
>
>
>
>
>
>
>
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Skymap IIIC internal battery replacement |
Thats why they make side cuts and chain saws :-) Seriously... that's one
spot where it's easy to lift a trace.
Noel
> -----Original Message-----
> From: owner-avionics-list-server@matronics.com
> [mailto:owner-avionics-list-server@matronics.com] On Behalf
> Of Bill Putney
> Sent: Wednesday, March 28, 2007 4:28 AM
> To: avionics-list@matronics.com
> Subject: Re: Avionics-List: Skymap IIIC internal battery replacement
>
>
>
> Peter,
>
> Thanks, I did get it apart to confirm the battery
> configuration. I found
> a place here in California that has the same battery configuration
> with the same chemistry as the one Skyforce used. It's about
> $3.25 plus
> Shipping. You have to request they weld on solderable tabs
> but that only
> costs and $0.25. I've been soldering for about 50 years but
> every once
> in a while I do lift a trace. I hate those 50W wire wound resisters
> soldered into a .020" trace. Easy to put in and hard to get out.
>
> http://www.batteryspace.com/index.asp?PageAction=VIEWPROD&ProdID=1617
>
> - Bill
>
> peter.rees01@tiscali.co.uk wrote:
> "peter.rees01@tiscali.co.uk" <peter.rees01@tiscali.co.uk>
> >
> > Hi Bill
> >
> > I did ours a few years ago (if the 3C you have is the one in an
> > avionics tray, not the slim one). didn' t have any
> instreuctions just
> > took the lid off and I think the top PCB (there are about 4
> boards in
> > there) - unsoldered the old battery and fitted the new one
> - only took
> > about an hour. If you're not good at soldering, I'd find
> someone who is
> > - the PCB tracks will lift etc if you overheat them.
> >
> > happy landings
> >
> > Peter
> >
> >
> >
> >
> >
> > ___________________________________________________________
> >
> > Tiscali Broadband only 9.99 a month for your first 3
> months! http://www.tiscali.co.uk/products/broadband/
> >
> >
> >
> >
> >
> >
> >
>
>
>
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|