Today's Message Index:
----------------------
1. 04:17 AM - Narco DME LED OUT (Peter Langlois)
2. 08:52 AM - KT-79 Transponder Tray Wanted (Stan Bearup)
3. 01:24 PM - DME LED OUT (Narco) (Peter Langlois)
4. 03:06 PM - Re: DME LED OUT (Narco) (Doug McNutt)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Narco DME LED OUT |
Here's my question:
After doing a battery charge, I discovered to my dissapointment that the
DME head serving my Narco MK 12D is not working. The VOR tracking is
working, but the DME LEDs seem to be out. Of course, I can't tell if the
DME is functional, but not displaying. Anyone have a similar experience? I
know that some Narco elements have a sacrificial part that is supposed to
prevent unit damage in the event of a voltage spike. Please, no
Narco-negative comments. The Garmin Fairy has not come to my home, and
it's not in his/her flight path (that I know of). I left the DME on during
the charging event. It's my fault. Any suggestions/Help are welcome. Any
recommendations on a radio shop in Md. or Northern VA are also welcome.
PETE
Peter Langlois
Tiger N45319 (with relatively antique radios)
Leesburg, VA
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | KT-79 Transponder Tray Wanted |
I am looking for a tray and connector for a KT-79 Transponder. Any leads
would be greatly appreciated.
Thanks,
Stan Bearup
208-226-5531
bearup@ida.net
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | DME LED OUT (Narco) |
Here's my question:
After doing a battery charge, I discovered to my dissapointment that the
DME head serving my Narco MK 12D is not working. The VOR tracking is
working, but the DME LEDs seem to be out. Of course, I can't tell if the
DME is functional, but not displaying. Anyone have a similar experience? I
know that some Narco elements have a sacrificial part (diode??) that is
supposed to prevent unit damage in the event of a voltage spike.
Please, no Narco-negative comments. The Garmin Fairy has not come to my
home, and it's not in his/her flight path (that I know of). I left the DME
on during the charging event. It's my fault. Any suggestions/Help are
welcome.
Any recommendations on a radio shop in Md. or Northern VA are also welcome.
PETE
Peter Langlois
Tiger N45319 (with relatively antique radios)
Leesburg, VA
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: DME LED OUT (Narco) |
At 15:20 -0500 6/13/07, Peter Langlois wrote:
>After doing a battery charge, I discovered to my dissapointment that the
>DME head serving my Narco MK 12D is not working. The VOR tracking is
>working, but the DME LEDs seem to be out. Of course, I can't tell if the
>DME is functional, but not displaying.
It would help to have a part number or two. I think the last DME that Narco made
was the DME195 which is a fairly large blue box hidden somewhere. I have seen
those beasts channeled by a MK12D but they have a readout that is a rectangle
about 1 inch high and 3 inches wide. The lamps are not LED's but rather seven-segment
incandescent lamps.
Can you listen to the DME code that is sent out every minute? That will tell you
something about what's working and what is not.
--
--> From the U S of A, the only socialist country that refuses to admit it. <--
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|